Home
›
BODY
›
EXTERIOR
›
REAR DOOR WINDOW FRAME MOULDING
REAR DOOR WINDOW FRAME MOULDING > COMPONENTS > Preparation
EQUIPMENT
Torque wrench
Protective tape
To avoid surface damage
Heat light
Double-sided tape
Piano wire
Clip remover
Wooden block or similar object
For tying both piano wire ends
Drill (Safety equipment: protective goggles, etc.)
Drill bit
Hand riveter
Rivet
Vacuum cleaner
RECOMMENDED TOOLS
09050-00032
Air Drill
09050-20010
Air Riveter
(09050-02020)
Nose Piece No.1
09070-20010
Moulding Remover