Home › General › INTRODUCTION › FEATURES › 2011.10–2013.07
NM19V0EQ _V1 General _014241 INTRODUCTION _0072840 FEATURES GE GENERAL F

INTRODUCTION  FEATURES  GENERAL  PERFORMANCE  


OUTLINE


a.

2AR-FE Engine

i.

The 2AR-FE engine is an in-line 2.5-liter, 16-valve DOHC engine. This engine uses a Dual Variable Valve Timing-intelligent (VVT-i) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS) and Electronic Throttle Control System-intelligent (ETCS-i). These control functions achieve improved engine performance, fuel economy, and clean emissions.

V101552

Item Specification
No. of Cyls. & Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC with Dual VVT-i
Fuel System SFI
Displacement cm3 (cu. in.) 2494 (152.2)
Max. Output (EEC) kW@rpm 133@6000*1, 135@6000*2
Max. Torque (EEC) N*m@rpm 231@4100*1, 235@4100*2

*1: Altise and GL grade

*2: Except Altise and GL grade



b.

EB62 Manual Transaxle

i.

An EB62 6-speed manual transaxle is used.

V101916

Transaxle Type EB62
Combination with Engine 2AR-FE
Gear Ratio 1st 3.538
2nd 2.047
3rd 1.375
4th 0.975
5th 0.744
6th 0.659
Reverse 3.545
Differential Gear Ratio 4.058



c.

U760E Automatic Transaxle

i.

A U760E 6-speed multi-mode automatic transaxle is used.

V101543

Transaxle Type U760E
Combination with Engine 2AR-FE
Gear Ratio 1st 3.300
2nd 1.900
3rd 1.420
4th 1.000
5th 0.713
6th 0.608
Reverse 4.148
Differential Gear Ratio* 3.815

*: Counter gear ratio included



d.

Suspension

i.

A MacPherson strut type independent suspension is used for the front.


ii.

A dual link MacPherson strut type independent suspension is used for the rear.

V101914



e.

Steering

i.

The Electric Power Steering (EPS) system uses a power steering motor, a power steering torque sensor and a reduction mechanism that are built into the steering column assembly to generate assist torque, in order to assist the driver's steering effort.

V101915
3.333,2.427 2.917,3.594 2.917,3.594 2.604,3.594 true 4.302,1.729 4.813,0.313 4.813,0.313 5.188,0.313 true 5.219,0.219 5.375,0.406 0.156,0.188 10 false *2 2.417,3.521 2.573,3.708 0.156,0.188 10 false *1
*1 Steering Gear Assembly *2 Steering Column Assembly




f.

Brake

Models for Australia
Item Specification
Manufacturer PBR ADVICS
Front Brake Type Ventilated Disc
Rotor Size (D x T)* mm (in.) 296 x 28 (11.65 x 1.10)
Rear Brake Type Solid Disc
Rotor Size (D x T)* mm (in.) 286 x 10 (11.26 x 0.39) 281 x 10 (11.06 x 0.39)
Brake Control System ABS with EBD, Brake Assist, TRC, and VSC

*: Diameter x Thickness

Models for G.C.C. Countries
Item Models
Manufacturer PBR ADVICS
Front Brake Type Ventilated Disc
Rotor Size (D x T)*1 mm (in.) 296 x 28 (11.65 x 1.10)
Rear Brake Type Solid Disc
Rotor Size (D x T)*1 mm (in.) 286 x 10 (11.26 x 0.39) 281 x 10 (11.06 x 0.39)
Brake Control System ABS with EBD and Brake Assist (Mechanical Type)*2
ABS with EBD, Brake Assist, TRC, and VSC*3

*1: Diameter x Thickness

*2: Standard equipment

*3: Optional equipment