Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE SYSTEM › 2011.10–2016.05
NM19V0EQ _54 Brake _014261 BRAKE SYSTEM (OTHER) _0072861 BRAKE SYSTEM GE GENERAL F

BRAKE SYSTEM (OTHER)  BRAKE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A tandem type brake master cylinder sub-assembly is used.


b.

A single diaphragm type brake booster assembly is used.


c.

Models with the brake control system (ABS with EBD, brake assist (mechanical type)) have the brake assist mechanism integrated into the brake booster.



SPECIFICATION


Brake Master Cylinder Sub-assembly Type Tandem
Diameter mm (in.) 22.2 (0.87)
Brake Booster Assembly Type Single Diaphragm
Size mm (in.) 252 (10.00)


MAIN FEATURES


a.

The mechanical type brake assist uses the brake assist mechanism in the brake booster to mechanically activate the brake booster function in order to increase the brake force.


b.

The primary purpose of the brake assist is to provide an auxiliary brake force to assist a driver who cannot generate a large brake force during emergency braking, thus helping to ensure the vehicle's brake performance.

X107103
0.646,0.865 2.615,1.51 1.969,0.646 10 false The fluid pressure is increased by the brake booster assembly 1.948,3.052 2.771,3.385 0.823,0.333 10 false Brake Force 4.021,4.344 4.396,4.667 0.375,0.323 10 false Time 0.542,4.083 1.781,4.417 1.24,0.333 10 false : With Brake Assist 0.552,4.375 2.448,4.708 1.896,0.333 10 false : Without Brake Assist