OUTLINE
Combination Meter Assembly
An analog type combination meter assembly is provided.
The combination meter assembly has a built-in meter ECU and buzzer.
A wide type Liquid Crystal Display (LCD) is provided for the combination meter assembly.
| *A | Altise and GL Grade | *B | Atara 2.5S, Atara 2.5SL and Atara 2.5SX Grade |
| *1 | Rheostat Switch | *2 | LCD |
| *3 | ODO/TRIP Switch | - | - |
| *A | GL Grade | *B | GLX and SE Grade |
| *1 | Rheostat Switch | *2 | LCD |
| *3 | ODO/TRIP Switch | - | - |
MAIN FEATURES
Combination Meter Assembly
An illumination control which allows for anticipation of a pleasant drive is used. If the ignition switch is turned to ON, the illumination control operates as follows:
When the ignition switch is turned to ON, the following illuminations fade in: the speedometer, tachometer, fuel gauge, fuel consumption meter needle indicator, LCD displays and meter panel illumination.
When the ignition switch is turned off, all the illuminations fade out.
|
Ignition switch off to ON |
|
Ignition switch ON to off |
Fuel Consumption Gauge
A needle indicator type average fuel consumption gauge is provided on the combination meter assembly. The needle indicator indicates the value in accordance with the average fuel consumption value displayed on the LCD.
| *1 | Average Fuel Consumption Gauge | - | - |
LCD
A wide type Liquid Crystal Display (LCD) is provided. This display shows the following information:
| Item | Outline |
|---|---|
| LCD | ·
The following information items are always displayed. ·
Shift Position Indicator ·
Engine Coolant Temperature Gauge (segment type display) ·
When the rheostat switch is pressed, the engine coolant temperature gauge will change into an indicator for meter illumination adjustment mode. The meter illumination can be switched between 6 levels. |
·
The following information items can be displayed. The item shown can be changed by pressing the ODO/TRIP switch. ·
Odometer ·
Trip Meter A ·
Trip Meter B ·
Ambient Temperature ·
Cruising Range ·
Average Fuel Consumption ·
Current Fuel Consumption ·
Average Speed ·
Pressing and holding the ODO/TRIP switch while the odometer is displayed changes the odometer to an on/off mode that enables or disables the operation of Eco Driving Indicator Light. |
PRECAUTION
Ignition Switch Expressions
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch
(Position) |
Engine Switch
(Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | Start |