Home › Engine / Hybrid System › 2AR-FE ENGINE CONTROL › SFI SYSTEM › 2011.10–2016.05
NM19V0EQ _51 Engine / Hybrid System _014243 2AR-FE ENGINE CONTROL _0072842 SFI SYSTEM DE DETAILS F

2AR-FE ENGINE CONTROL  SFI SYSTEM  DETAILS  ACOUSTIC CONTROL INDUCTION SYSTEM (ACIS) CONTROL  


OPERATION


a.

To match the longer pulsation cycle, the ECM activates the VSV so that vacuum acts on the diaphragm chamber of the actuator. This closes the control valve. As a result, the effective length of the intake manifold is lengthened and the intake efficiency in the medium speed range is improved due to the dynamic effect of the intake air, thereby increasing the power output.

W105643
1.448,2.479 1.813,2.635 0.365,0.156 10 ECM 1.073,2.979 3.208,3.146 2.135,0.167 10 : Effective Intake Manifold Length 4.292,1.25 4.656,1.448 0.365,0.198 10 Open 4.188,2.479 4.646,2.646 0.458,0.167 10 Closed 4.74,2.677 5.031,2.854 0.292,0.177 10 Low 6.479,2.688 6.781,2.885 0.302,0.198 10 High 5.365,2.833 6.271,3 0.906,0.167 10 Engine Speed 5.552,1.375 6.115,1.552 0.563,0.177 10 VSV ON 4.031,1.719 4.542,2.052 0.51,0.333 10 Throttle Valve


b.

Under any condition except when the engine is running at medium speed under high load, the ECM causes the actuator to open the control valve. When the control valve is open, the effective length of the intake manifold is lengthened is shortened and peak intake efficiency is shifted to the low-to-high engine speed range, thus providing greater output at low-to-high engine speeds.

W105644
1.479,2.625 1.844,2.781 0.365,0.156 10 ECM 1.083,3.146 3.208,3.313 2.125,0.167 10 : Effective Intake Manifold Length 4.281,1.406 4.646,1.604 0.365,0.198 10 Open 4.188,2.625 4.646,2.792 0.458,0.167 10 Closed 4.74,2.792 5.031,2.969 0.292,0.177 10 Low 6.479,2.792 6.781,2.99 0.302,0.198 10 High 5.406,2.958 6.313,3.125 0.906,0.167 10 Engine Speed 5.542,2.094 6.208,2.271 0.667,0.177 10 VSV OFF 4.052,1.875 4.563,2.208 0.51,0.333 10 Throttle Valve