Home › Engine / Hybrid System › 2AR-FE ENGINE CONTROL › SFI SYSTEM
NM19V0EQ _51 Engine / Hybrid System _014243 2AR-FE ENGINE CONTROL _0072842 SFI SYSTEM DE DETAILS F

2AR-FE ENGINE CONTROL  SFI SYSTEM  DETAILS  STARTER CONTROL (CRANKING HOLD FUNCTION)  


OPERATION


a.

Models with Smart Entry and Start System

i.

When the engine switch is pressed, the certification ECU (smart key ECU assembly) receives a start signal.


ii.

When the certification ECU (smart key ECU assembly) detects a start signal (STSW), the certification ECU (smart key ECU assembly) outputs a starter relay drive signal (STAR). The signal goes through the park/neutral position switch assembly to the starter relay. The starter relay activates the starter assembly when it receives this signal. At this time, the certification ECU (smart key ECU assembly) turns off the ACC relay by turning off the power sent from the ACCD terminal. the ACC relay is turned off to prevent flickering of the meters, clock and audio system.


iii.

When communication between the certification ECU (smart key ECU assembly) and ECM stops, the certification ECU (smart key ECU assembly) uses the engine speed (NE) signal received from the ECM via a direct line to determine when to turn off the starter.

W104844
3.458,4.365 3.604,4.719 3.604,4.719 3.896,4.719 true 0.292,1.344 1.219,1.521 0.927,0.177 10 Engine Switch 1.677,0.792 2.135,0.948 0.458,0.156 10 STSW 2.021,3.104 2.438,3.25 0.417,0.146 10 ACCD 3.906,0.667 4.198,0.854 0.292,0.188 10 NE 2.875,3.229 3.281,3.396 0.406,0.167 10 STAR 1.24,3.604 1.969,3.781 0.729,0.177 10 ACC Relay 4.01,4.646 4.844,5.469 0.833,0.823 10 Park/Neutral Position Switch Assembly 1.969,5.51 2.813,5.708 0.844,0.198 10 Starter Relay 4.677,2.167 5.052,2.323 0.375,0.156 10 ECM 6.073,1.073 7.063,1.625 0.99,0.552 10 Engine Coolant Temperature Signal 6.063,3.177 6.969,3.521 0.906,0.344 10 Engine Speed Signal 0.417,6.604 0.906,6.781 0.49,0.177 10 Battery 2.635,6.344 3.844,6.604 1.208,0.26 10 Starter Assembly 3.74,2.146 4.323,2.479 0.583,0.333 10 CAN (V Bus) 2.438,1.313 3.573,1.823 1.135,0.51 10 Certification ECU (Smart Key ECU Assembly)


iv.

While cranking, the certification ECU (smart key ECU assembly) continues energizing the starter relay until it is determined that the engine has started. When the certification ECU (smart key ECU assembly) has judged that the engine has started, the certification ECU (smart key ECU assembly) stops energizing the starter relay.


v.

If the engine does not start, the starter operates for a length of time that is based on engine coolant temperature. This can range from 25 seconds at lower temperatures to 2 seconds when the engine is at operating temperature.

Y101460
0.344,0.479 1.24,1.417 0.896,0.938 10 false Engine Switch (Start Signal) 1.365,0.313 1.906,0.615 0.542,0.302 10 false ON 5.844,3.833 6.896,4.302 1.052,0.469 10 false Failed Starting of Engine 3.469,1.198 3.792,1.5 0.323,0.302 10 false *1 4.417,3.198 4.74,3.5 0.323,0.302 10 false *2 1.365,1.406 1.906,1.708 0.542,0.302 10 false ON 0.333,1.635 1.188,1.813 0.854,0.177 10 false Starter Relay 0.333,2.333 1.031,2.615 0.698,0.281 10 false ACC Relay 1.365,2.135 1.906,2.438 0.542,0.302 10 false ON 1.365,0.802 1.906,1.104 0.542,0.302 10 false OFF 1.365,1.865 1.906,2.167 0.542,0.302 10 false OFF 1.365,2.604 1.906,2.906 0.542,0.302 10 false OFF 0.333,3.833 1.198,4.354 0.865,0.521 10 false Engine Speed Signal (NE) 0.333,4.74 2.208,4.958 1.875,0.219 10 false *1: Cranking Limit: 30 seconds 0.333,5.052 6.677,5.448 6.344,0.396 10 false *2: The certification ECU (smart key ECU assembly) determines that the engine has started successfully when the engine speed is approximately 500 rpm.


vi.

This system has the following safety features:

·

While the engine is running, the starter cannot operate.

·

The starter will stop operating once the engine has started, even if the engine switch remains pushed.

·

Starter operation is limited to a maximum of 25 seconds to protect the starter motor.