Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › ENGINE UNIT
NM19V0EQ _51 Engine / Hybrid System _014244 2AR-FE ENGINE MECHANICAL _0072843 ENGINE UNIT DE DETAILS F

2AR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  PISTON  


CONSTRUCTION


a.

The pistons are made of aluminum alloy.


b.

The tops of the pistons utilize a taper squish shape to achieve fuel combustion efficiency.


c.

The piston skirts are coated with resin to reduce friction losses.


d.

The groove of the No. 1 compression ring is coated with alumite to ensure abrasion resistance.


e.

Low-tension piston rings are used to reduce friction and achieve excellent fuel economy.


f.

Narrow-width piston rings are used to reduce weight and friction.


g.

A Physical Vapor Deposition (PVD) coating has been applied to the surface of the No. 1 compression ring, in order to improve its wear resistance.

W111179
3.125,0.729 3.125,0.396 3.125,0.396 2.792,0.396 true 5.375,0.583 5.667,0.583 true 1.375,1.167 1.792,1.167 true 1.75,1.833 1.417,1.833 1.417,1.833 1.417,2.083 true 2.604,0.292 2.917,0.49 0.313,0.198 10 *a 1.188,1.063 1.5,1.26 0.313,0.198 10 *b 1.354,2.083 1.667,2.281 0.313,0.198 10 *c 5.698,0.469 6.01,0.667 0.313,0.198 10 *d 4.896,0.792 5.208,0.99 0.313,0.198 10 *1 4.896,1.479 5.208,1.677 0.313,0.198 10 *2 4.896,2.292 5.208,2.49 0.313,0.198 10 *3
*1 No. 1 Compression Ring *2 No. 2 Compression Ring
*3 Oil Ring - -
*a Taper Squish Shape *b Alumite Coating
*c Resin Coating *d PVD Coating