Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › ENGINE UNIT
NM19V0EQ _51 Engine / Hybrid System _014244 2AR-FE ENGINE MECHANICAL _0072843 ENGINE UNIT DE DETAILS F

2AR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CONNECTING ROD  


CONSTRUCTION


a.

Connecting rod sub-assemblies that have been forged for high strength are used for weight reduction.


b.

Knock pins are used at the mating surfaces of the connecting rod caps to minimize the shifting of the connecting rod caps during assembly.


c.

Plastic region tightening bolts are used for the connecting rods.


d.

Aluminum bearings are used for the connecting rod bearings.


e.

The connecting rod bearings are reduced in width to reduce friction.


f.

The lining surfaces of the connecting rod bearing are micro-grooved to achieve an optimal amount of oil clearance. As a result, cold-engine cranking performance has been improved and engine vibration has been reduced.

W100798
2.313,2.51 2.875,2.51 true 4.385,2.771 4.385,3.115 true 4.958,0.969 4.958,0.427 4.958,0.427 5.406,0.427 true 2.344,2.865 2.344,3.219 true 1.521,2.865 1.521,3.208 true 2.271,3.25 2.469,3.448 0.198,0.198 10 *1 2.906,2.427 3.104,2.625 0.198,0.198 10 *2 4.323,3.135 4.521,3.302 0.198,0.167 10 *4 5.448,0.354 5.646,0.552 0.198,0.198 10 *3 1.448,3.25 1.646,3.448 0.198,0.198 10 *1
*1 Plastic Region Bolt *2 Knock Pin
*3 Micro-grooved *4 Connecting Rod Bearing