Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › ENGINE UNIT
NM19V0EQ _51 Engine / Hybrid System _014244 2AR-FE ENGINE MECHANICAL _0072843 ENGINE UNIT DE DETAILS F

2AR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CAMSHAFT TIMING INTAKE GEAR  


CONSTRUCTION


a.

The camshaft timing gear assembly consists of an outer housing that is driven by the timing chain sprocket, and a vane sub-assembly that is coupled to the camshaft.


b.

The camshaft timing gear assembly uses a vane with 4 lobes.


c.

When the engine stops, the intake camshaft timing gear assembly is locked at the most retarded angle by its lock pin. This ensures excellent engine startability.


d.

The oil pressure sent from the advance or retard side passages of the intake camshaft causes rotation of the vane sub-assembly relative to the timing chain sprocket, varying the valve timing continuously.

W100805
3.542,1.26 3.542,0.656 3.542,0.656 3.667,0.656 true 4.313,1.219 4.313,0.469 4.313,0.469 4.438,0.469 true 5.729,0.979 5.729,0.292 5.729,0.292 5.875,0.292 true 4.375,1.792 4.375,2.25 true 5.188,1.667 5.188,2.24 true 3.719,0.573 3.927,0.729 0.208,0.156 10 *1 4.479,0.396 4.688,0.552 0.208,0.156 10 *2 5.896,0.219 6.104,0.375 0.208,0.156 10 *3 4.302,2.281 4.51,2.438 0.208,0.156 10 *4 5.115,2.281 5.323,2.438 0.208,0.156 10 *5 3.917,3 4.125,3.156 0.208,0.156 10 *a 4.74,3 4.948,3.156 0.208,0.156 10 *b 4.323,3.281 4.531,3.438 0.208,0.156 10 *6
*1 Housing *2 Lock Pin
*3 Camshaft *4 Vane (Fixed on Intake Camshaft)
*5 Sprocket *6 Lock Pin
*a Engine Stopped *b Engine Operating
V100135

Oil Pressure - -