Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › ENGINE UNIT
NM19V0EQ _51 Engine / Hybrid System _014244 2AR-FE ENGINE MECHANICAL _0072843 ENGINE UNIT DE DETAILS F

2AR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  TIMING CHAIN AND CHAIN TENSIONER  


CONSTRUCTION


a.

A roller chain with a 9.525 mm (0.375 in.) pitch is used.


b.

The No. 1 chain tensioner assembly uses a spring and oil pressure to maintain proper chain tension at all times. The chain tensioner suppresses noise generated by the chain sub-assembly.


c.

The No. 1 chain tensioner sub-assembly is a ratcheting type with a non-return mechanism.


d.

To achieve excellent serviceability, the No. 1 chain tensioner assembly is constructed so that it can be removed and installed through a service hole in the timing chain cover sub-assembly.

W100807
3.104,0.646 2.219,0.646 true 3.177,1.448 2.177,1.448 true 3.01,2.302 2.24,2.302 true 3.875,1.698 4.604,1.698 true 3.615,0.552 3.615,0.229 3.615,0.229 3.719,0.229 false 2.042,0.583 2.25,0.75 0.208,0.167 10 *1 3.75,0.156 3.958,0.323 0.208,0.167 10 *2 4.646,1.625 4.854,1.792 0.208,0.167 10 *4 2.021,1.365 2.229,1.531 0.208,0.167 10 *3 2.052,2.219 2.26,2.385 0.208,0.167 10 *5
*1 Chain Sub-assembly *2 No. 2 Chain Vibration Damper
*3 Chain Tensioner Slipper *4 No. 1 Chain Vibration Damper
*5 No. 1 Chain Tensioner Assembly - -