Home › Engine / Hybrid System › 2AR-FE INTAKE / EXHAUST › INTAKE SYSTEM › 2011.10–2016.05
NM19V0EQ _51 Engine / Hybrid System _014247 2AR-FE INTAKE / EXHAUST _0072847 INTAKE SYSTEM DE DETAILS F

2AR-FE INTAKE / EXHAUST  INTAKE SYSTEM  DETAILS  INTAKE MANIFOLD  


CONSTRUCTION


a.

The intake manifold is made of plastic to realize a lightweight construction.


b.

The intake air surge tank consists of an upper and lower section and contains an intake air control valve. This valve is activated by the Acoustic Control Induction System (ACIS) and is used to alter the intake pipe length to improve the engine performance in all engine speed ranges.


c.

The ACIS actuator uses a VSV and a vacuum actuator, and is laser-welded onto the intake air surge tank. Many of the components are made of plastic for weight reduction.

W105628
0.896,1.396 0.896,0.49 0.896,0.49 1.26,0.49 true 2.948,1.51 2.948,0.604 2.948,0.604 3.313,0.604 true 1.885,2.188 1.885,3.208 true 3.031,2.25 3.031,3.26 true 4.063,1.969 4.063,2.979 true 1.313,0.396 1.49,0.552 0.177,0.156 10 *1 3.375,0.51 3.552,0.667 0.177,0.156 10 *2 1.833,3.229 2.01,3.385 0.177,0.156 10 *3 2.969,3.271 3.146,3.427 0.177,0.156 10 *4 4,3 4.177,3.156 0.177,0.156 10 *4
*1 Mesh Type Gasket *2 VSV (For ACIS)
*3 Intake Air Control Valve *4 ACIS Actuator