Home › Drivetrain › U760E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM
NM19V0EQ _52 Drivetrain _014252 U760E AUTOMATIC TRANSMISSION / TRANSAXLE _0072852 AUTOMATIC TRANSAXLE SYSTEM DE DETAILS F

U760E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  DETAILS  ATF FILLING PROCEDURE  


CONSTRUCTION


a.

A special ATF filling procedure is used in order to improve the accuracy of the ATF level when the transaxle is being repaired or replaced. As a result, the oil filler tube and the oil level gauge used in the conventional automatic transmission have been discontinued, eliminating the need to inspect the fluid level as a part of routine maintenance.


b.

This filling procedure uses a refill plug, overflow plug, ATF temperature sensor, and the D indicator. For details about the ATF filling procedure, refer to the Repair Manual.

X104218
5.885,2.198 5.885,1.25 5.885,1.25 5.646,1.25 true 5.99,2.75 5.99,3.219 true 5.469,1.156 5.677,1.344 0.208,0.188 10 *a 5.927,3.229 6.156,3.417 0.229,0.188 10 *2 0.521,0.615 0.729,0.802 0.208,0.188 10 *1
*1 Refill Plug *2 Overflow Plug
*a Proper Level - -