CONSTRUCTION
Water Cooled Oil Cooler (RHD Models)
A transmission oil cooler is used for the purpose of warming up the ATF quickly and to keep the ATF temperature higher (within limits). As a result, fuel economy has been improved.
A transmission oil cooler is used for the purpose of warming up the ATF quickly and to keep the ATF temperature higher (within limits). As a result, fuel economy has been improved.
After the ATF warms up, the engine coolant that flows through the transmission oil cooler will help to limit the ATF temperature increase.
| *1 | Transmission Oil Cooler | - | - |
| *a | To Engine | *b | From Heater Radiator Unit Sub-assembly |
|
Engine Coolant |
|
ATF WS |
Air Cooled Oil Cooler (Models with Air Cooled Oil Cooler)
Air cooled oil cooler cools down the ATF using the cooling fins which are provided on the cooler itself, and is fitted inside the radiator grille so that it can be exposed to the air directly while the vehicle is running.
| *1 | Air Cooled Oil Cooler | - | - |
|
From Radiator Assembly |
|
To Automatic Transaxle |