CONSTRUCTION
The shift mechanism consists of an outer shift lever, an outer select lever, a shift and select lever shaft assembly, 3 gear shift fork shaft assemblies, a reverse shift arm bracket assembly, and a reverse shift fork.
The distances between the shift and select lever shaft and each gear shift fork shaft, and the distance between the center lines of the gear shift fork shafts and the gear shift forks have been shortened. This reduces sliding resistance, thus improving shift feeling.
A symmetrical shape is used for the shift forks to improve shift feeling.
| *1 | Outer Select Lever | *2 | Reverse Shift Arm Bracket Assembly |
| *3 | Reverse Shift Fork | *4 | No. 3 Gear Shift Fork Shaft Assembly |
| *5 | No. 2 Gear Shift Fork Shaft Assembly | *6 | No. 1 Gear Shift Fork Shaft Assembly |
| *7 | Shift and Select Lever Shaft Assembly | *8 | Outer Shift Lever |
A pre-synchronizing system is used. While reverse is selected, the synchromesh mechanism of 4th gear is activated, thus preventing gear noise when shifting into reverse.
| *1 | No. 1 Reverse Pre-balk Head | *2 | No. 2 Reverse Pre-balk Head |
| *3 | No. 3 Reverse Pre-balk Head | *4 | No. 2 Gear Shift Fork Shaft Assembly |
| *5 | Synchromesh Mechanism (for 3rd and 4th Gears) | *6 | No. 3 Gear Shift Fork Shaft Assembly |
| *7 | Shift and Select Lever Shaft Assembly | - | - |
| *a | Reverse Direction Selected | - | - |