CONSTRUCTION
Brake Actuator Assembly
The brake actuator assembly consists of the actuator portion and skid control ECU.
| *A | Models with Brake Control System (ABS with EBD) | *B | Models with Brake Control System (ABS with EBD, Brake Assist, TRC and VSC) |
| *1 | Skid Control ECU | *2 | Actuator Portion |
On models with the brake control system (ABS with EBD), the actuator portion consists of 4 pressure holding solenoid valves, 4 pressure reduction solenoid valves, 2 pumps and 2 reservoirs.
On models with the brake control system (ABS with EBD, Brake Assist, TRC and VSC), the actuator portion consists of 2 master cylinder cut solenoid valves, 2 reservoir cut solenoid valves, 4 pressure holding solenoid valves, 4 pressure reduction solenoid valves, 2 pumps, 2 reservoirs, and a master cylinder pressure sensor.
The brake actuator is constructed with the following hydraulic circuit:
| *1 | Brake Master Cylinder Sub-assembly | *2 | Brake Actuator Assembly |
| *3 | Pressure Holding Solenoid Valve | *4 | Pressure Reduction Solenoid Valve |
| *5 | Pump | *6 | Reservoir |
| *7 | Front Brake Caliper (Left Side) | *8 | Rear Brake Caliper (Right Side) |
| *9 | Rear Brake Caliper (Left Side) | *10 | Front Brake Caliper (Right Side) |
| *1 | Brake Master Cylinder Sub-assembly | *2 | Brake Actuator Assembly |
| *3 | Master Cylinder Pressure Sensor | *4 | Master Cylinder Cut Solenoid Valve |
| *5 | Reservoir Cut Solenoid Valve | *6 | Pressure Holding Solenoid Valve |
| *7 | Pressure Reduction Solenoid Valve | *8 | Pump |
| *9 | Reservoir | *10 | Front Brake Caliper (Left Side) |
| *11 | Rear Brake Caliper (Right Side) | *12 | Rear Brake Caliper (Left Side) |
| *13 | Front Brake Caliper (Right Side) | - | - |