CONSTRUCTION
Brake Assist Mechanism
The brake assist mechanism consists of the slide valve, slide valve hook, air valve, control valve and operation rod in the brake booster.
| *1 | Brake Booster | *2 | Air Valve |
| *3 | Control Valve | *4 | Operation Rod |
| *5 | Slide Valve Hook | *6 | Slide Valve |
OPERATION
Brake Assist Mechanism
When the brakes are not being applied, the air valve closes, and the pressure is the same in the variable pressure chamber and the constant pressure chamber.
| *1 | Constant Pressure Chamber | *2 | Variable Pressure Chamber |
| *a | Air Valve Closed | - | - |
During normal braking, the air valve opens to activate the brake booster function.
| *1 | Constant Pressure Chamber | *2 | Variable Pressure Chamber |
| *3 | Operation Rod | *4 | Power Piston |
| *a | Push | *b | Air Valve Open |
| *c | Moves | - | - |
When the operation rod speed is faster than the power piston speed, the air valve pushes the slide valve hook. Consequently, the slide valve separates from the slide valve hook, and the slide valve pushes the control valve to open the air valve wider than under normal braking. Thus, the air volume that is introduced increases. This results in a brake assist force to powerfully push the power piston.
| *1 | Constant Pressure Chamber | *2 | Variable Pressure Chamber |
| *3 | Power Piston | *4 | Control Valve |
| *5 | Slide Valve Hook | *6 | Slide Valve |
| *7 | Air Valve | *8 | Operation Rod |
| *a | Push | *b | Air Valve Open |
| *c | Air Valve "Wide Open" | *d | Moves a greater amount |