Home › Steering › STEERING COLUMN › STEERING LOCK SYSTEM
NM19V0EQ _55 Steering _014266 STEERING COLUMN _0072866 STEERING LOCK SYSTEM CO CONTROL F

STEERING COLUMN  STEERING LOCK SYSTEM  CONTROL  STEERING LOCK CONTROL  


FUNCTION


a.

Steering Lock Actuator Assembly

i.

The steering lock ECU is integrated in the steering lock actuator assembly, and the ECU controls the lock bar operation in the steering lock actuator assembly through the control of lock/unlock motor.


ii.

The steering lock ECU detects the position (lock/unlock) of the lock bar and transmits this information to the main body ECU (multiplex network body ECU) and certification ECU (smart key ECU assembly).


iii.

In this system, the certification ECU (smart key ECU assembly) determines whether to lock or unlock the steering based on communication with the main body ECU (multiplex network body ECU). Then, the certification ECU (smart key ECU assembly) sends lock or unlock command signals to the steering lock ECU through CAN communication and LIN communication. Upon receiving the signals, the steering lock ECU operates the lock/unlock motor to lock or unlock the steering.

HINT:

It is not possible to replace only the steering lock ECU in the steering lock actuator assembly. Therefore, if the ECU malfunctions, the entire steering lock actuator assembly must be replaced.