Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM › 2011.10–2015.04
NM19V0EQ _56 Audio / Visual / Telematics _014268 NAVIGATION / MULTI INFO DISPLAY _0072869 NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM CO CONTROL F

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM  CONTROL  NAVIGATION / MULTI INFORMATION  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Models with HDD navigation system

*2: Models for G.C.C. countries

*3: Models for Australia

*4: Models with navigation system

Navigation Receiver Assembly*1 Consists of a navigation ECU sub-assembly and Hard Disk Drive (HDD).
Navigation ECU Sub-assembly*1 Receives and processes data from the built-in components, such as the touch-sensitive display panel which allows flick or drag operation, navigation computer, gyro sensor or GPS receiver and various components positioned in different parts of the vehicle, controlling the navigation system and providing various information and the operation status via the multi-display using images, voice and sounds.
Major Components of Navigation ECU Sub-assembly*1 Multi-display Panel
·

Displays a map screen or an operation screen based on image signals from the navigation computer.

·

Sends operation signals input via the touch-sensitive display panel to the navigation computer.


Navigation Computer
·

Updates the vehicle position based on location information calculated from GPS information, vehicle speed signals, information from the built-in sensors and the shift status.

·

Applies the mark of the calculated vehicle position to the map data in the Hard Disk Drive (HDD) and sends the data to the multi-display.

·

Sends voice guidance audio signals to the speakers.*2

·

Sends voice guidance audio signals to the stereo component amplifier assembly.*3


Gyro Sensor Detects the vehicle's vertical axis rotation speed (yaw rate and rotation movement) and sends it to the navigation computer.
GPS Receiver Demodulates GPS information received by the navigation antenna assembly, calculates the vehicle position and sends the position signal to the navigation computer.
Hard Disk Drive (HDD)*1 Contains map data and the navigation system control program, etc.
Navigation Receiver Assembly*4 Receives and processes data from the built-in components, such as the touch-sensitive display panel which allows flick or drag operation, navigation computer, gyro sensor or GPS receiver and various components positioned in different parts of the vehicle, controlling the navigation system and providing various information and the operation status via the multi-display using images, voice and sounds.
Major Components of Navigation Receiver Assembly*4 Multi-display Panel
·

Displays a map screen or an operation screen based on image signals from the navigation computer.

·

Sends operation signals input via the touch-sensitive display panel to the navigation computer.


Navigation Computer
·

Updates the vehicle position based on location information calculated from GPS information, vehicle speed signals, information from the built-in sensors and the shift status.

·

Applies the mark of the calculated vehicle position to the map data in the microSD card (disc player disc) and sends the data to the multi-display.

·

Sends voice guidance audio signals to the stereo component amplifier assembly.


Gyro Sensor Detects the vehicle's vertical axis rotation speed (yaw rate and rotation movement) and sends it to the navigation computer.
GPS Receiver Demodulates GPS information received by the navigation antenna assembly, calculates the vehicle position and sends the position signal to the navigation computer.
microSD Card Slot Interfaces with the microSD card (disc player disc), which contains map data, the navigation system control program, etc.
microSD Card (Disc Player Disc)*4 Contains map data and the navigation system control program, etc.
Navigation Antenna Assembly Receives GPS signals from satellites in orbit around the Earth, at an altitude of approximately 20200 km (12600 miles), and sends them to the navigation receiver assembly.
Parking Brake Switch Assembly Sends the parking brake position signal to the navigation receiver assembly.
Park/Neutral Position Switch Assembly Sends an R shift position signal to the navigation receiver assembly.
Window Glass Antenna Wire*2
·

AM

·

FM


Receives radio broadcasting signals (AM/FM).
Window Glass Antenna Wire*3
·

AM

·

FM

·

DAB


Receives radio broadcasting signals (AM/FM/DAB).
No. 1 Amplifier Antenna Assembly Amplifies radio broadcasting signals from the radio antenna and sends them to the navigation receiver assembly.
Digital Audio Broadcasting Antenna Assembly*3 Amplifies DAB signals from the DAB antenna and sends them to the navigation receiver assembly.
Steering Pad Switch Assembly Sends operation signals from switches such as the volume switch, mode switch, 4 way switch, enter switch and back switch operation to the spiral cable with sensor sub-assembly.
Spiral Cable with Sensor Sub-assembly Sends operation signals from the steering pad switch assembly to the navigation receiver assembly.
Roof Console Box Assembly Houses the telephone microphone assembly.
Telephone Microphone Assembly Recognizes the user's voice and sends audio signals to the navigation receiver assembly.
No. 1 Stereo Jack Adapter Assembly Communicates with the navigation receiver assembly via a USB communication line when a USB memory device, portable audio player (USB type) or Apple product is connected.
Combination Meter Assembly Sends vehicle speed signals to the navigation receiver assembly or stereo component amplifier*3.
Stereo Component Amplifier Assembly*3 Amplifies audio signals sent from the navigation receiver assembly and sends them to the speakers.


FUNCTION


a.

Navigation Screen

i.

The navigation computer calculates the present position and direction of travel, then determines a route and calculates the driving distance based on the following information sources:

·

Map data in the Hard Disk Drive (HDD) (Models with HDD navigation system)

·

Map data in the microSD card (disc player disc) (Models with navigation system)

·

Global Positioning System (GPS) satellites

·

Built-in gyro sensor

·

Vehicle speed signal

·

Reverse signal

·

Parking Blake signal

·

Radio Data System Traffic Message Channel (RDS-TMC) signal (Models for Australia)



ii.

The functions of the navigation screen are listed below.

Item Function

*1: Models with HDD navigation system

*2: Models with navigation system

*3: Models for Australia with HDD navigation system

*4: Models for G.C.C. countries

*5: Models for Australia

Map Display Linear Touch Scroll*1 Enables smooth scrolling by connecting the touch points on the screen.
Map Color Change*1 Depending on the position of the light control switch, the screen changes to day mode or night mode.
Map Scroll*2 Scroll operation on the map screen can be selected in the following 2 ways:
·

Flick/drag scrolling: Flick or drag in the direction that brings your desired location closer to the center of the map screen.

·

Point scrolling: Enables scrolling by connecting the touch points on the map screen.


Taillight-interlocked Map Color Change Changes the color of the map screen that is displayed when the taillights are turned on.
North Up / Heading Up
·

If North Up is selected, regardless of the direction of vehicle travel, north is always up.

·

If Heading Up is selected, the direction of vehicle travel is always up.


3D Display Displays a 3-dimensional (3D) view of the map.
Multi-step Scale Display*1 Changes the map scale in 14 steps.
Direct Scale Change*1 Directly selects and displays the map scale.
Map Scale Display*2 Allows the map scale to be adjusted.
Street Name Indication on Scrolled Map Displays the street name and city name even when the map screen is being scrolled.
Stepless Scale Display*1 Changes the scale of the map from the basic 14 steps to an even finer range of scales.
Road Number Sign Board Display*1 Displays the road number on the map.
Point of Interest Display Displays selected types of points of interest as marks on the map.
Split-view Display*1 Displays different screens on a screen that is split into 2 views.
Multiple Display Function*2 Displays different mode screens on a screen that is split into 3 views or 2 views.
Compass Mode Screen*1 Displays the direction of travel and detailed data of the present location.
Current Position Display Function Displays the latitude, longitude and altitude of the current position based on the GPS signals being received.
Route Guidance Demonstration Demonstrates the route guidance to the destination.
Route Trace*1 Stores up to the last 124 miles (200 km) of a traveled route and retraces the route on the display.
Route Trace*2 By saving a traveled route automatically or saving it manually upon reaching the destination, the routes can be displayed and retraced.
RDS-TMC Display*2 Displays RDS-TMC icons, arrows, popup messages and indicators when RDS-TMC service is being received.
Destination Search Preset Destination Memory Search Sets a pre-registered point as a destination point while driving.
Address Search*3 A destination can be set in 2 ways:
·

Information can be entered in the order of: street name, city and house number.

·

Information can be entered in the order of: city, street name and house number.


Address Search*4 A destination can be set in 2 ways:
·

Information can be entered in the order of: city name, street name and house number.

·

Information can be entered in the order of: house number, street address and city name.


Address Search*2 A destination can be set by city/town name.
Point of Interest Search*2 A destination can be set in 4 ways:
·

Quick search

·

Preset search

·

Category search

·

Name search


Hybrid Point of Interest Search*1 Narrows the search by names of the point of interest, category and areas.
Map Search A destination can be set by using the cursor on the map screen.
Previous Destination Search*1 Stores the coordinates, names, and dates of up to 100 locations that have been set as destinations in the past.
Previous Destination Search*2 A destination can be set using the destination list in which previously set destinations are stored.
Intersection Search By specifying 2 streets, the point at which they intersect is set as the destination point.
Highway/Motorway Entrance or Exit Search*1 Searches for the destination by the name of the street that connects to a highway/motorway entrance or exit.
Coordinate Search*1 A destination can be input by entering its coordinates.
Phone Number Search*1 A destination can be input by entering its phone number.
Route Search Multiple Destination Setting*1 Sets multiple destinations. Can also rearrange sequence of destinations.
Multiple Route Search Searches for multiple routes.
Search Condition Designation*1 Searches for quick 1, quick 2, and short routes.
Search Condition Designation*2
·

Searches for quick, short, and alternate routes.

·

Sets whether the following routes should be avoided during route search:

·

Highways

·

Toll Roads

·

Ferries

·

Unsealed Roads

·

4WD Tracks



Adds Waypoints*2 Adds waypoints along with the set route to set the pass points.
Detour Search*1 Changes the route to detour around a section of the route.
Regulated Road Consideration Performs searches which consider regulated roads.
Avoidance Area*1 Searches for a route that avoids a designated areay.
Adjacent Road Search*3 Searches for a route adjacent to the current road.
Traffic Congestion Information Consideration*2 Performs searches which consider traffic congestion information.
Auto Avoid Traffic Search*2 Automatically changes to route to avoid heavy congestion.
Auto Re-route Search Performs automatic re-route search if the vehicle deviates from the set route.
Guidance Voice Guidance Provides voice guidance about the distance and the direction of travel to a destination point based on road conditions and vehicle speed.
Next Turn Guidance Provides guidance about the distance to the next turn and indicates the direction of the turn using an arrow.
Highway/Motorway Mode Display*1 Displays the distance to the next junction and exit, or POIs in the vicinity of the highway/motorway exit.
Highway/Motorway Direction of Travel Display*1 Displays the direction of travel to take on the highway/motorway.
Intersection Zoom-in Display*1 Zooms in the map display when approaching an intersection.
Turn List Display*1 Displays a turn list on the right side of the 2-screen display.
Lane Information Guidance*2 Provides lane information and indicates the lane to be driven in when the vehicle is on a multiple lane road.
Signposts Display*2 Displays lane information similar to overhead road traffic signs on the top of the map screen.
Real Highway/Motorway Junction Display*2 Displays the junction and signage in 3D in the vicinity of a major junction while driving.
Arrow (Turn-by-Turn) Display*1 Displays the direction of the next turn and the distance to the turn on the right side of the 2-screen display.
Distance-to-destination Display*1 Displays the distance from the present location to the destination.
Estimated Arrival Time Display*1 Displays estimated arrival time.
Route Status Information Display*2 Displays route items that the driver selects to display, such as the current vehicle speed or altitude, in the data fields at the corner of the map screen. Route data related to the destination or following way points also can be displayed.
Route Progress Bar Display*2 Displays the progress made on the current route using the route progress bar to the left of the map screen.
Others Voice Recognition*5 Recognizes pre-programmed system commands spoken to operate the navigation system.



b.

Setup Screen (HDD Navigation System)

i.

The settings for the functions of the multi-display are available from the setup screen.

Item Function

*1: Models for G.C.C. countries

*2: Models for Australia

Display Settings
·

Map Menu and Camera screens can be adjustment.

·

Depending on the position of the headlight switch, the screen changes to day or night mode.


General Settings
·

The time zone, the on/off setting of daylight saving time can be changed.

·

The language can be selected.*1

·

The beep sound can be turned off.

·

Automatic return from the audio screen to the map screen after audio operation can be changed.

·

The color of the screen buttons can be changed.

·

Registered information (personal data) can be cleared.


Voice Settings
·

The voice guidance volume can be adjusted or switched off.

·

Voice recognition talkback can be set.*2

·

Voice guidance while using the audio system can be set.

·

Voice guidance during route guidance can be set.


Navigation Settings The Navigation Settings can be used to:
·

Set detailed navigation settings such as average cruising speed

·

Buttons displayed on the map screen when "OFF" is selected

·

Set detailed navigation settings such as displayed POI icon categories

·

Set the cautionary message display shown when a regulated street is included in the route

·

Set the display of pop-up information

·

Set the railroad crossing advisory*2

·

Set the high accident location guidance*2

·

Manual adjustment of the current vehicle position mark


Vehicle Settings
·

Settings can be changed for the following maintenance items:

·

Reminder

·

Engine oil

·

Oil filter

·

Rotation

·

Tires

·

Battery

·

Brake pad

·

Wipers

·

Coolant

·

Brake oil

·

Trans. Fluid

·

Service

·

Air filter

·

Personal

·

Set dealer


·

Customizable vehicle settings can be changed.


Phone Settings*1
Telephone Settings*2
·

Phone sound settings can be changed:

·

Call Volume

·

Ring Tone Volume

·

Ring Tone


·

Phonebook settings can be changed:

·

Manage Contacts

·

Manage Speed Dials

·

Delete Call History

·

Manage Voice Tags*1


·

Phone display settings can be changed:

·

Change the incoming call display

·

Display of the automatic phonebook transfer completion message (For PBAP compatible models)

·

Display of the automatic call history transfer completion message (For PBAP compatible models)

·

Display of images during calls (For PBAP compatible models)

·

Orientation of images displayed during calls (For PBAP compatible models)



Bluetooth Settings
·

Bluetooth device registration settings can be changed:

·

Register a Bluetooth device

·

Delete a Bluetooth device

·

Edit a Bluetooth device


·

Bluetooth devices can be selected

·

Bluetooth device settings can be changed:

·

Automatic connection to a Bluetooth device

·

Desired Bluetooth device name

·

Bluetooth device passcode

·

Display Bluetooth device connection status

·

Display cover art when a song stored in an iPod is being played



Audio Settings
·

Sound quality can be adjusted.*2

·

Radio settings can be changed:

·

Setting to automatically seek an FM station that regularly broadcasts traffic information and station broadcasts can be set

·

Setting to automatically select an FM station providing good reception if current reception worsens can be set

·

Setting to switch over to a broadcasting station within the same local program network can be set

·

A station providing good reception is automatically selected if current reception worsens.*2



Traffic Information Settings*2
·

The voice guidance for traffic information can be switched off.

·

Display of the traffic information icon can be set.

·

The detour route function can be selected.

·

The stations can be selected.





c.

Setup Screen (Navigation System)

i.

The settings for the functions of the multi-display are available from the setup screen.

Item Function

*: PBAP non-compatible phone, or PBAP compatible phone with the automatic telephone number transfer function set to off.

General Settings
·

The time zone, the on/off setting of daylight saving time can be changed.

·

The unit of measurement for fuel consumption can be changed.

·

The beep sound can be turned off.

·

The color of the screen buttons can be changed.

·

Keyboard layout can be changed.

·

Automatic return from the audio screen to the home screen after audio operation can be changed.

·

Animations can be set to on/off.

·

The opening image can be changed.

·

The screen off image can be changed.

·

Registered information (personal data) can be cleared.

·

The navigation system program can be updated.

·

Third party software information used in the navigation system, such as notices, can be displayed.


Home Screen Settings The display items/area on the home screen can be changed.
Voice Settings
·

The voice guidance volume can be adjusted or switched off.

·

Voice guidance during route guidance can be set.

·

Voice recognition prompts can be set.

·

Voice recognition prompt interruption can be set to on/off.


Display Settings
·

Map Menu, Camera and Video screens can be adjusted.

·

Depending on the position of the headlight switch, the screen changes to day or night mode.


Bluetooth Settings
·

Bluetooth devices can be registered.

·

Bluetooth devices can be deleted.

·

Bluetooth devices can be selected.

·

Bluetooth devices can be edited.

·

Bluetooth system settings can be changed:

·

Automatic connection to a Bluetooth device

·

Bluetooth device name

·

Bluetooth device PIN-code

·

Bluetooth device address

·

Display of Bluetooth device connection status

·

Bluetooth device profile



Phone Settings
·

A Bluetooth phone can be registered or connected.

·

Telephone sound settings can be changed:

·

Ring Tone

·

Ring Tone Volume

·

Message Readout volume

·

SMS/MMS Incoming Tone

·

SMS/MMS Incoming Tone Volume

·

E-mail Incoming Tone

·

E-mail Incoming Tone Volume

·

In-call Volume


·

Contact/Call history settings can be changed:

·

Automatic contact/history transfer function settings when a PBAP compatible Bluetooth phone is connected

·

Contacts Update

·

Contacts Sorting

·

Favorites list registration

·

Contacts deletion from the favorites list

·

Contact image display

·

Call history deletion*

·

New contact addition to the contact list*

·

Contact list editing*

·

Contact deletion from the contact list*


·

Message function settings can be changed:

·

Message forwarding from cellular phones

·

Automatic message readout

·

SMS/MMS notification popup

·

E-mail notification popup

·

Vehicle signature on outgoing messages

·

Message read status on phone update

·

Incoming SMS/MMS display when an SMS/MMS message is received "Full Screen": The incoming SMS/MMS display screen is displayed and can be operated on the screen. "Drop-Down": A message is displayed on the upper side of the screen and can be operated only via the steering wheel switches.

·

Incoming E-mail display when an E-mail is received "Full Screen": The incoming E-mail display screen is displayed and can be operated on the screen. "Drop-Down": A message is displayed on the upper side of the screen and can be operated only via the steering wheel switches.

·

Display of messaging account names on the inbox tab


·

Telephone display settings can be changed:

·

Incoming call display

·

Display of the automatic contact/history transfer completion message



Audio Settings
·

FM radio settings can be changed:

·

Radio text display on/off settings


·

DAB radio settings

·

iPod settings

·

Cover art settings can be changed.


Toyota Link
·

The voice guidance volume can be adjusted or switched off.

·

The pop up reminder for cellular phone data usage can be set.


Vehicle Information
·

Customizable vehicle settings can be changed.

·

TOYOTA park assist settings can be changed.

·

Back camera guide line settings can be changed.


Screen Off The screen can be turned off.



d.

Fuel Consumption Screen

i.

The fuel consumption screen is displayed as illustrated below. This screen has the display functions listed below.

HDD Navigation System
Y144176E01
2.646,0.792 2.802,0.385 2.802,0.385 2.948,0.385 true 0.333,1.25 0.615,1.25 true 0.344,1.656 0.625,1.656 true 0.344,2.083 0.625,2.083 true 0.969,2.406 1.083,2.813 1.083,2.813 1.229,2.813 true 2.281,2.031 2.521,2.813 2.521,2.813 2.667,2.813 true 3.219,1.688 3.5,1.688 true 4.729,0.99 4.938,0.396 4.938,0.396 5.083,0.396 true 5.365,0.781 5.5,0.396 5.5,0.396 5.646,0.396 true 5.958,0.76 6.083,0.396 6.083,0.396 6.229,0.396 true 6.26,1.052 6.802,1.052 true 4.292,2.396 4.406,2.802 4.406,2.802 4.552,2.802 true 5.427,2.01 5.667,2.792 5.667,2.792 5.813,2.792 true 0.469,3.177 6.771,3.385 6.302,0.208 10 false The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens. 3,0.271 3.458,0.469 0.458,0.198 10 false (1) 0.135,1.135 0.594,1.333 0.458,0.198 10 false (2) 0.135,1.552 0.594,1.75 0.458,0.198 10 false (3) 0.135,1.969 0.594,2.167 0.458,0.198 10 false (4) 1.281,2.708 1.74,2.906 0.458,0.198 10 false (5) 2.729,2.708 3.188,2.906 0.458,0.198 10 false (6) 3.552,1.583 4.01,1.781 0.458,0.198 10 false (7) 5.135,0.281 5.594,0.479 0.458,0.198 10 false (8) 6.844,0.938 7.146,1.208 0.302,0.271 10 false (10) 5.708,0.281 6.167,0.479 0.458,0.198 10 false (9) 4.594,2.698 4.896,2.969 0.302,0.271 10 false (11) 5.854,2.698 6.156,2.969 0.302,0.271 10 false (12) 6.292,0.292 6.75,0.49 0.458,0.198 10 false (1)

Item Outline
(1) Clear Switch Clears all past information.
(2) Average Speed Displays the value that has been calculated by the combination meter assembly, which is based on the distance driven and time elapsed since the ignition switch is turned to ON.
(3) Elapsed Time Displays the value that has been calculated by the combination meter assembly, which is based on the time elapsed since the ignition switch is turned to ON.
(4) Cruising Range Displays the approximate drivable distance.
(5) Past Record Switch Changes to the fuel consumption Past Record (per trip) screen.
(6) Average Fuel Consumption Per Minute
·

Displays the value that has been calculated by the combination meter assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), since the ignition switch was to turned to ON.

·

Displays the average fuel consumption for the last minute, or since clear was last selected.


(7) Current Fuel Consumption Per Minute Displays the instantaneous (current) fuel consumption value that has been calculated by the combination meter assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), since the ignition switch was to turned to ON.
(8) Best Fuel Consumption Displays the best (most economical) per trip fuel consumption.
(9) Update Switch
·

Restarts calculation of the average fuel consumption value.

·

Sends the average fuel consumption reset signal to the combination meter assembly to update the graph.


(10) Average Fuel Consumption Displays the average fuel consumption for this trip and the previous 5 trips.
(11) Trip Information Switch Changes to the fuel consumption average per minute screen.
(12) Average Fuel Consumption Per Trip
·

Displays the current record and the last 5 average per trip fuel consumption records or the current record and those since clear was last selected.

·

Starts calculating the average fuel consumption when the average fuel consumption displayed on the combination meter assembly is reset.



Navigation System
Y144110E01
1.792,0.938 1.906,0.406 1.906,0.406 2.063,0.406 true 0.396,1.406 0.635,1.406 true 0.385,1.833 0.625,1.833 true 0.406,2.26 0.646,2.26 true 0.99,2.76 0.99,2.531 true 2.188,2.771 2.188,2.198 true 3.5,2.094 3.188,2.094 true 4.656,1.146 4.771,0.615 4.771,0.615 4.927,0.615 true 5.281,0.948 5.396,0.417 5.396,0.417 5.552,0.417 true 5.854,1.208 5.969,0.677 5.969,0.677 6.125,0.677 true 5.188,2.781 5.188,2.031 true 4.438,2.76 4.438,2.51 true 6.448,2.781 6.448,2.531 true 0.396,3.323 6.76,3.563 6.365,0.24 10 false The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens. 2.135,0.313 2.615,0.542 0.479,0.229 10 false (1) 0.177,1.302 0.656,1.531 0.479,0.229 10 false (2) 0.177,1.75 0.656,1.979 0.479,0.229 10 false (3) 0.198,2.146 0.677,2.375 0.479,0.229 10 false (4) 0.917,2.781 1.396,3.01 0.479,0.229 10 false (5) 2.125,2.813 2.604,3.042 0.479,0.229 10 false (6) 3.542,2.01 4.021,2.24 0.479,0.229 10 false (7) 4.99,0.521 5.469,0.75 0.479,0.229 10 false (8) 5.635,0.313 6.115,0.542 0.479,0.229 10 false (1) 6.177,0.583 6.656,0.813 0.479,0.229 10 false (9) 5.094,2.802 5.573,3.031 0.479,0.229 10 false (11) 4.333,2.792 4.813,3.021 0.479,0.229 10 false (10) 6.333,2.823 6.813,3.052 0.479,0.229 10 false (12)

Item Outline
(1) Clear Switch Clears all past information.
(2) Average Speed Displays an average speed value that has been calculated by the combination meter assembly, which is based on the distance driven and time elapsed since the ignition switch was turned to ON.
(3) Elapsed Time Displays an elapsed time value that has been calculated by the combination meter assembly, which is based on the time elapsed since the ignition switch was turned to ON.
(4) Cruising Range Displays the approximate drivable distance.
(5) Past Record Switch Changes the screen to the fuel consumption Past Record (per trip) screen.
(6) Average Fuel Consumption Per Minute
·

Displays the value that has been calculated by the combination meter assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal) since the ignition switch was turned to ON.

·

Displays the average fuel consumption for the last minute, or since clear was last selected.


(7) Current Fuel Consumption Displays the instantaneous (current) fuel consumption value that has been calculated by the combination meter assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal) since the ignition switch was turned to ON.
(8) Best Fuel Consumption Displays the best (most economical) per trip fuel consumption.
(9) Average Fuel Consumption Displays the average fuel consumption for this trip.
(10) Trip Information Switch Changes the screen to the fuel consumption average per minute screen.
(11) Average Fuel Consumption Per Trip
·

Displays the current record and the last 5 average per trip fuel consumption records or the current record and those since clear was last selected.

·

Starts calculating the average fuel consumption when the average fuel consumption displayed on the combination meter assembly is reset.


(12) Update Switch
·

Restarts calculation of the average fuel consumption value.

·

Sends the average fuel consumption reset signal to the combination meter assembly to update the graph.






DIAGNOSIS


a.

For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.