Home › Vehicle Exterior › MIRROR (EXT) › MIRROR SYSTEM
NM19V0EQ _59 Vehicle Exterior _014281 MIRROR (EXT) _0072892 MIRROR SYSTEM CO CONTROL F

MIRROR (EXT)  MIRROR SYSTEM  CONTROL  MIRROR CONTROL  


SYSTEM CONTROL


a.

Power Electrical Remote Control Function

i.

This function operates when all of the following conditions are met:

·

The ignition switch is ACC or ON.

·

When R or L position of the mirror select switch has been selected.

·

The user operates a outer mirror switch assembly to control the electric remote mirrors.




b.

Reverse-linked Function*

i.

This function operates when all of the following conditions are met:

·

The engine switch is on (IG).

·

When either of R or L position of the mirror select switch has been selected.

·

Shift lever is moved to R position.




c.

Memory System (mirror surface position memory function)*

i.

This function operates when any of the following conditions are met:

·

When the memory switch is operated with the engine switch on (IG), shift lever P position selected and the mirror position stored in the memory system.

·

When the memory switch is operated within approximately 60 seconds after closing the driver side door, with the engine switch off, shift lever P position selected and the mirror position stored in the memory system.

·

When the memory switch is operated within approximately 180 seconds after opening the driver side door with the engine switch off, shift lever P position selected and the mirror position stored in the memory system.

·

With the engine switch off, driver door closed and the key ID registration of the memory call function complete, the doors are unlocked using the smart access function or wireless door unlock function and then the driver door is opened.

*: Models with memory function





FUNCTION


a.

The outside rear view mirrors have the following functions:

Function Outline
Electric Remote Mirrors Remote Control Function The adjustment axis of the mirror surface of the electric remote mirrors can be controlled by using the outer mirror switch assembly.
Reverse-linked Function* This function tilts the mirror surface downward to improve visibility when reversing.
Memory System* The memory system can store the driver seat, outside rear view mirror positions and tilt & telescopic steering positions. Up to 3 memory positions can be stored in the system memory and recalled.

*: Models with memory function