Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM
NM19V0EQ _59 Vehicle Exterior _014282 WIPER / WASHER _0072893 WIPER AND WASHER SYSTEM CO CONTROL F

WIPER / WASHER  WIPER AND WASHER SYSTEM  CONTROL  WASHER CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The raindrop sensing function consists of the following parts:

Component Function
Windshield Wiper Switch Assembly
·

Outputs the position signal of the windshield wiper switch assembly to the windshield wiper motor assembly, windshield washer motor and pump assembly and windshield wiper relay assembly.

·

Setting this switch to AUTO will cause the rain sensing function to operate. This switch is also used to adjust the rain sensing function sensitivity.*


Wiper Motor and Link Assembly Activates the front wiper in accordance with the position signal of the wiper switch (windshield wiper switch assembly) or the control signal from the windshield wiper relay assembly.
Windshield Washer Motor and Pump Assembly Activates the front windshield washer motor and pump assembly in accordance with the signal from the front washer switch (windshield wiper switch assembly).
Rain Sensor* Senses rain when the wiper switch (windshield wiper switch assembly) is in AUTO, and sends signals to the windshield wiper relay assembly.
Windshield Wiper Relay Assembly* Receives the operation signal from the windshield wiper switch assembly (wiper switch and washer switch) and the rain sensor, and inputs them into the front windshield wiper motor assembly.
Combination Meter Assembly* Outputs the vehicle speed signal to the windshield wiper relay assembly.

*: Models with rain sensing



FUNCTION


a.

Raindrop Sensing Function

i.

The raindrop sensing function controls the wiping timing in accordance with the amount of raindrops when the windshield wiper switch assembly is in the AUTO position.


ii.

This control is effected by the rain sensor based on the amount of raindrops and input signals from the wiper controller.


iii.

An illuminance detection function is provided to automatically change the raindrop sensitivity according to day or night.



b.

Washer-linked Wiper Function

i.

When the windshield wiper switch assembly is in the off or AUTO position and the washer switch is turned on for approximately 0.5 seconds or more, the wipers start on LO at the same time as the washer fluid is sprayed.

Y102268
3.844,0.427 3.604,0.427 3.604,0.427 3.5,0.698 true 4.5,3.479 4.229,3.479 4.229,3.479 4.135,3.156 true 0.219,0 1.469,0.365 1.25,0.365 12 false Timing Chart: 4.531,0.865 6.385,1.281 1.854,0.417 10 false Approximate 0.5 Seconds 3.906,0.313 5.76,0.729 1.854,0.417 10 false Washer Switch on Time 4.552,3.385 6.406,3.802 1.854,0.417 10 false Additional Wiper Operation 0.875,1.167 1.948,1.49 1.073,0.323 10 false Washer Switch 0.875,2.604 2.042,3.188 1.167,0.583 10 false Wiper Motor and Link Assembly 0.875,1.792 1.958,2.479 1.083,0.688 10 false Washer-linked Operation 2.135,1 2.469,1.281 0.333,0.281 10 false On 2.135,1.385 2.469,1.667 0.333,0.281 10 false Off 2.135,1.688 2.469,1.969 0.333,0.281 10 false On 2.135,2.063 2.469,2.344 0.333,0.281 10 false Off 2.135,2.458 2.469,2.74 0.333,0.281 10 false On 2.135,2.854 2.469,3.135 0.333,0.281 10 false Off




FAIL-SAFE


a.

If the windshield wiper relay assembly detects a malfunction of the rain sensor during the operation of the raindrop sensing function, the following controls will be performed:

·

Continuously performs wiper operation prior to the occurrence of a malfunction.

·

Switches to intermittent operation if a malfunction of the rain sensor is detected when the ignition switch is turned from off to ON or the windshield wiper switch assembly is in the AUTO position.