Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE
NM19V0EQ _59 Vehicle Exterior _014284 EXTERIOR PANELS / TRIM _0072895 BODY STRUCTURE DE DETAILS F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  DETAILS  SAFETY FEATURES  


FUNCTION


a.

Impact Absorbing Structure for Frontal Collision

i.

Through the adoption of a body structure that disperses collision energy to multiple frame components, collision energy is efficiently absorbed to suppress cabin deformation.


ii.

The front side members absorb and disperse energy in a frontal collision.


iii.

Door beltline reinforcements are strengthened to optimize dispersal of collision energy to the rocker panel and floor panel.

Y112040
2.542,3.51 2.802,3.51 2.802,3.51 2.802,2.698 true 3.625,3.427 3.302,3.427 3.302,3.427 3.302,2.875 true 2.354,3.427 2.625,3.573 0.271,0.146 10 *1 3.688,3.333 3.938,3.479 0.25,0.146 10 *2
*1 Front Side Member *2 Beltline Reinforcement
V100136

Impact
V100135

Impact Flow




b.

Impact Absorbing Structure for Side Collision

i.

Through the adoption of a body structure that disperses collision energy to multiple frame components, collision energy is efficiently absorbed to suppress cabin deformation.


ii.

The center pillars are strengthened to optimize dispersal of collision energy to the rocker panel and roof reinforcement.


iii.

The use of roof reinforcement and floor crossmember enables a construction that transmits load to the opposite side of the vehicle in a collision.


iv.

Optimal placement of the impact protect beams enables a construction that efficiently transmits load.

Y112045
2.073,0.844 2.229,0.844 2.229,0.844 4,2.094 true 1.813,1.188 1.927,1.188 1.927,1.188 3.354,2.375 true 2.927,0.365 3.146,0.365 3.146,0.365 3.469,0.75 true 4.521,3.188 4.521,3.094 4.521,3.094 4.292,2.823 true 6.021,0.698 5.677,0.698 5.677,0.698 4.323,2.042 true 3.208,3.292 3.208,3.146 3.208,3.146 3.375,2.719 true 5.677,2.729 5.677,2.615 5.677,2.615 4.917,2.083 true 6.115,0.594 6.292,0.771 0.177,0.177 10 *1 1.615,1.094 1.823,1.271 0.208,0.177 10 *2 2.75,0.271 2.948,0.417 0.198,0.146 10 *4 1.885,0.74 2.083,0.885 0.198,0.146 10 *3 4.458,3.208 4.646,3.417 0.188,0.208 10 *5 3.146,3.302 3.333,3.51 0.188,0.208 10 *6 5.604,2.74 5.792,2.948 0.188,0.208 10 *6
*1 Center Pillar Outer Reinforcement *2 Front Floor Crossmember
*3 Center Floor Crossmember *4 Roof Reinforcement
*5 Rocker Panel Reinforcement *6 Impact Protect Beam
V100135

Impact Flow - -



v.

When the roof is subjected to an impact, the impact is dispersed to the roof reinforcements, front pillars and center pillars, thereby minimizing deformation of the cabin.

Y112046
3.458,1.938 3.365,2.052 false
V100136

Impact
V100135

Impact Flow




c.

Impact Absorbing Structure for Rear Collision

i.

Straight rear side members are used to reduce body deformation in a rear collision.



d.

Lessening Pedestrian Injury

i.

A hood reinforcement is provided for the hood inner panel to help secure excellent pedestrian protection performance and tensile rigidity.

Y112355
4.438,0.448 4.281,0.448 4.281,0.448 3.844,1.313 true 1.917,2.396 1.917,2.25 1.917,2.25 2.427,1.833 true 4.458,0.375 4.656,0.542 0.198,0.167 10 false *1 1.823,2.438 2.021,2.604 0.198,0.167 10 false *2
*1 Longitudinal Ribbed Structure *2 Dent Reinforcement (Impact Absorbing Structure)



ii.

An impact absorbing bracket is used for the mounting portion of the front fender panel to absorb impact energy to the head of the pedestrian in a collision, thus dampening the impact to the head.

Y112050
6.417,2.25 6.417,2.135 6.417,2.135 5.917,1.833 true 4.969,1.417 5.125,1.417 5.125,1.417 5.615,1.646 true 4.958,4.052 5.042,4.052 5.042,4.052 5.521,4.302 true 6.333,4.802 6.177,4.802 6.177,4.802 5.958,4.354 true 2.469,3.646 2.24,3.646 2.24,3.646 2.01,4.021 true 2.76,4.063 2.594,4.063 2.594,4.063 2.438,4.438 true 0.813,0.792 0.906,0.792 0.906,0.792 1.323,1.49 true 0.292,1.083 0.396,1.083 0.396,1.083 0.708,1.625 true 3.427,0.135 3.115,0.135 3.115,0.135 2.875,0.51 true 1.417,0.865 1.594,1.083 0.177,0.219 10 A 1.833,1.198 2.01,1.417 0.177,0.219 10 A 2.427,0.427 2.604,0.646 0.177,0.219 10 B 2.906,0.792 3.083,1.01 0.177,0.219 10 B 4.365,0.552 4.594,0.833 0.229,0.281 10 *a 0.646,0.698 0.875,0.979 0.229,0.281 10 *1 3.5,0.063 3.729,0.344 0.229,0.281 10 *2 4.375,3.344 4.667,3.677 0.292,0.333 10 *b 4.813,1.323 5.135,1.552 0.323,0.229 10 *c 6.344,2.271 6.646,2.542 0.302,0.271 10 *d 4.771,3.958 5,4.188 0.229,0.229 10 *c 2.51,3.531 2.74,3.76 0.229,0.229 10 *c 6.365,4.688 6.542,4.958 0.177,0.271 10 *d 2.823,3.969 3,4.24 0.177,0.271 10 *d 0.135,0.99 0.365,1.271 0.229,0.281 10 *1
*1 Impact Absorbing Bracket (Front) *2 Impact Absorbing Bracket (Rear)
*a A-A Cross Section *b B-B Cross Section
*c Before Collision *d After Collision
V100136

Impact - -



iii.

The cowl uses an open section structure that collapses easily in an impact from the top, thus reducing the impact to and head injuries sustained by a pedestrian in an accident.

Y112071
5.479,2.875 5.479,2.74 5.479,2.74 6.021,2.427 true 6.917,2.927 6.917,2.698 6.917,2.698 6.563,2.396 true 6.656,0.958 6.552,0.958 6.552,0.958 6.385,1.875 true 4.563,3.375 4.563,3.229 4.563,3.229 5.104,2.969 true 1.375,1.615 1.531,1.792 0.156,0.177 10 false A 1.688,1.417 1.844,1.594 0.156,0.177 10 false A 3.719,0.729 3.875,0.906 0.156,0.177 10 false *a 5.417,2.896 5.573,3.073 0.156,0.177 10 false *b 6.865,2.958 7.021,3.135 0.156,0.177 10 false *c 6.688,0.875 6.844,1.052 0.156,0.177 10 false *1 4.5,3.396 4.656,3.573 0.156,0.177 10 false *2
*1 Window Shield Glass *2 Cowl Top Panel Sub-assembly
*a A-A Cross Section *b Before Collision
*c After Collision - -
V100136

Impact - -