FUNCTION
An aero stabilizing fin is provided on the outer rear view mirror base for enhanced aerodynamics.
After passing the aero stabilizing fin, the air speed will increase and vortex flow will be generated.
This vortex flow increases the speed of surrounding air while at the same time pulling the airflow towards the vehicle body.
The airflow with higher speed passes near both sides of the vehicle body and ends at the rear of the vehicle. This helps to hold the vehicle body, thus stabilizing the vehicle.
| *1 | Aero Stabilizing Fin | *2 | Vortex |
|
Airflow |
|
Hold the Vehicle from Both Side |
The height, angle, and shape of the front bumper have been optimized, resulting in smooth airflow underneath the floor.
| *1 | Front Bumper | - | - |
|
Airflow | - | - |
Various types of airflow routing parts are provided under the floor to control airflow.
A fin-shaped engine under covers and rear under cover have been adopted to achieve higher diffuser efficiency, thereby ensuring stability.
|
Undercover Area | - | - |