OUTLINE
An analog type or optitron type combination meter assembly is provided.
An analog type combination meter assembly, which has a wide type Liquid Crystal Display (LCD), is provided.
An optitron type combination meter assembly, which has a color multi-information display, is provided.
The combination meter assembly has a built-in meter ECU and buzzer.
| *A | Altise and GL Grade | *B | Except Altise and GL Grade |
| *a | Rheostat Switch | *b | LCD |
| *c | ODO/TRIP Switch | *d | The illustrations shown are examples only. |
| *a | Rheostat Switch | *b | Multi-information Display |
| *c | ODO/TRIP Switch | *d | The illustration shown is an example only. |
MAIN FEATURES
Opening/Ending Ceremony (Models without Multi-information Display)
An illumination control which allows for anticipation of a pleasant drive is used. If the ignition switch is turned to ON, the illumination control operates as follows:
When the ignition switch is turned to ON, the following illuminations fade in: the speedometer, tachometer, fuel gauge, fuel consumption meter needle indicator, LCD displays and meter panel illumination.
When the ignition switch is turned off, all the illuminations fade out.
| *a | The illustrations shown are examples only. | - | - |
|
Ignition switch off to ON |
|
Ignition switch ON to off |
Opening/Ending Ceremony (Models with Multi-information Display)
An opening/ending ceremony which allows for anticipation of a pleasant drive is used. The ceremony operates as follows:
When the engine switch is turned on (IG), the needles, gauges and panels of the speedometer, tachometer, engine coolant temperature gauge and fuel gauge and the multi-information display illuminate.
When the engine switch is turned off, all the illuminations fade out. During this period, the multi-information display shows the Eco Drive Level for 3 seconds.
| *a | IG ON | *b | IG OFF |
| *c | The illustrations shown are examples only. | - | - |
Fuel Consumption Gauge (Models without Multi-information Display)
A needle indicator type average fuel consumption gauge is provided on the combination meter assembly. The needle indicator indicates the value in accordance with the average fuel consumption value displayed on the LCD.
| *a | Average Fuel Consumption Gauge | - | - |
LCD (Models without Multi-information Display)
A wide type Liquid Crystal Display (LCD) is provided. This display shows the following information:
| Item | Outline |
|---|---|
| LCD | ·
The following information items are always displayed. ·
Shift Position Indicator ·
Engine Coolant Temperature Gauge (segment type display) ·
When the rheostat switch is pressed, the engine coolant temperature gauge will change into an indicator for meter illumination adjustment mode. The meter illumination can be switched between 6 levels. ·
The following information items can be displayed. The item shown can be changed by pressing the ODO/TRIP switch. ·
Odometer ·
Trip Meter A ·
Trip Meter B ·
Ambient Temperature ·
Cruising Range ·
Total Average Fuel Consumption between Reset Operations ·
Current Fuel Consumption ·
Average Vehicle Speed after Engine Start-up ·
Pressing and holding the ODO/TRIP switch while the odometer is displayed changes the odometer to an on/off mode that enables or disables the operation of Eco Driving Indicator Light. |
Multi-information Display (Models with Multi-information Display)
The multi-information display is located at the center of the combination meter assembly.
The multi-information display shows the following information.
| Item | Outline |
|---|---|
|
*1: Models with dynamic radar cruise control system *2: Models with lane departure alert system *3: Models with navigation system |
|
| Shift Position Indicator | The current shift position is displayed. |
| Outside Temperature | ·
The outside temperature is displayed. ·
When the outside temperature drops below 3°C (37°F), an ice warning illuminates to warn the driver to drive with caution due to possibly icy road conditions. After the ice warning flashes 10 times, the warning stays on. When the temperature reaches 5°C (41°F), the warning goes off. |
| Indicator | When the display conditions are met, the following indicators illuminate.
·
Cruise Control Indicator ·
Cruise SET Indicator ·
Cruise Control Indicator (Vehicle-to-Vehicle Distance Control Mode)*1 ·
Lane Departure Alert Indicator*2 |
| Information | The following information can be displayed on the multi-information display by switching the tabs.
·
Drive Information ·
Navigation Information*3 ·
Cruise Control System/Dynamic Radar Cruise Control System*1 Information ·
Warning Message ·
Settings
|
| ODO/TRIP Meter | ·
The odometer, trip meter A or trip meter B are displayed. ·
The item shown can be switched by pressing the ODO/TRIP switch knob. |
| Warning Message | A warning display will interrupt the current display on the multi-information display immediately when a warning is necessary. |
| Light Control Rheostat | Meter panel luminance can be changed by using the rheostat switch knob. |
The drive information shows the following information.
| Item | Outline |
|---|---|
| Drive Information | ·
The items selected on the setting screen can be displayed. 2 items can be selected in drive information 3 among the following: ·
Total Average Vehicle Speed between Reset Operations ·
Average Vehicle Speed after Engine Start-up ·
Total Elapsed Time between Reset Operations ·
Elapsed Time after Engine Start-up ·
Cruising Range ·
Cruising Range after Engine Start-up ·
Total Cruising Range between Reset Operations ·
Blank ·
In addition to the above functions, the following items can be displayed. ·
Drive Information 1 (Current Fuel Consumption and Total Average Fuel Consumption between Reset Operations) ·
Drive Information 2 (Eco Drive Level) ·
Blank
|
When navigation information is being displayed, current navigation information (turn-by-turn, straight guidance or direction meter) can be displayed. (Models with navigation system)
PRECAUTION
Ignition Switch Expressions
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch
(Position) |
Engine Switch
(Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |