Home › Engine / Hybrid System › 2AR-FE ENGINE CONTROL › SFI SYSTEM › from 2016.05
NM19V0EQ _51 Engine / Hybrid System _014243 2AR-FE ENGINE CONTROL _0072842 SFI SYSTEM DE DETAILS F

2AR-FE ENGINE CONTROL  SFI SYSTEM  DETAILS  TUMBLE CONTROL VALVE  


CONSTRUCTION


a.

Tumble Control Valve (EURO V Models)

i.

The tumble control valves are built into the intake manifold. The tumble control valves close when the engine is cold, generating tumble flow in the combustion chamber.


ii.

The actuator activates the tumble control valves based on signals from the ECM.

W103461C01
4.604,1.281 4.604,0.417 4.604,0.417 4.885,0.417 true 3.99,1.302 3.99,2.604 3.99,2.604 4.167,2.604 true 3.458,1.208 3.458,2.604 3.458,2.604 3.635,2.604 true 2.917,1.083 2.917,2.615 2.917,2.615 3.083,2.615 true 2.333,0.969 2.333,2.625 2.333,2.625 2.51,2.625 true 4.885,0.344 5.135,0.573 0.25,0.229 10 *1 2.542,2.542 2.76,2.698 0.219,0.156 10 *2 3.083,2.542 3.302,2.698 0.219,0.156 10 *2 3.656,2.542 3.875,2.729 0.219,0.188 10 *2 4.219,2.542 4.438,2.729 0.219,0.188 10 *2
*1 Intake Air Control Valve Actuator
- Tumble Control Valve Position Sensor
*2 Tumble Control Valve



iii.

A tumble control valve position sensor that uses a Hall IC is built into the actuator for the tumble control valves.


iv.

The tumble control valve position sensor detects the opening amount of the tumble control valves, and sends signals to the ECM.

W100838E04
1.052,1.458 1.271,1.458 1.271,1.458 1.271,2.417 true 2.552,0.823 2.01,0.823 true 1.865,2.052 2.198,2.052 2.198,2.052 2.198,2.885 true 2.688,1.313 2.688,2.031 true 3.844,1.385 3.667,1.385 3.667,1.385 3.667,1.99 true 4.26,1.615 4.469,0.438 4.469,0.438 4.635,0.438 false 6.365,1.875 6.75,2.063 0.385,0.188 10 ECM 5.677,1.521 6.042,1.667 0.365,0.146 10 VCIA 5.719,2 6.083,2.146 0.365,0.146 10 IAC1 5.708,2.469 6.073,2.615 0.365,0.146 10 EIA1 4.281,2.115 4.729,2.281 0.448,0.167 10 Hall IC 4.677,0.354 5.521,0.573 0.844,0.219 10 Magnet 2.479,2.052 2.927,2.219 0.448,0.167 10 Hall IC 3.427,1.979 4.031,2.302 0.604,0.323 10 Magnetic Yoke 1.958,2.885 2.479,3.063 0.521,0.177 10 Magnet 0.51,0.75 2,1.177 1.49,0.427 10 Intake Air Control Valve Actuator 0.531,1.375 1.063,1.948 0.531,0.573 10 Tumble Control Valve 1.792,3.854 2.042,4.052 0.25,0.198 10 (V) 1.313,5.521 1.813,5.885 0.5,0.365 10 Output Voltage 1.052,7.156 1.854,7.323 0.802,0.167 10 Fully Closed 2.667,7.104 4.021,7.469 1.354,0.365 10 Tumble Control Valve Opening Angle 4.927,7.125 5.635,7.292 0.708,0.167 10 Fully Open