Home › General › SPECIFICATIONS › 2AR-FE FUEL
RM19V0EQ _V1 General _014571 SPECIFICATIONS _0073859 2AR-FE FUEL F

SPECIFICATIONS  2AR-FE FUEL  SERVICE DATA  


Fuel pressure Standard fuel pressure 304 to 343 kPa (3.1 to 3.5 kgf/cm2, 44 to 50 psi)
Fuel pressure : at fuel pressure remains for 5 minutes after engine has stopped Standard fuel pressure 147 kPa (1.5 kgf/cm2, 21 psi) or more
Fuel injector assembly Standard resistance 11.6 to 12.4 Ω at 20°C (68°F)
Injection volume 88 to 106 cc (5.4 to 6.5 cu.in.) per 15 seconds
Difference between each fuel injector 18 cc (1.1 cu.in.) or less
Standard leakage 1 drop or less per 20 minutes
Fuel pump Standard resistance 0.2 to 3.0 Ω at 20°C (68°F)
Fuel sender gauge assembly Standard resistance 13.5 to 16.5 Ω(Float level F)
13.5 to 414.5 Ω(Float level E to F)
405.5 to 414.5 Ω(Float level E)