Home › General › SPECIFICATIONS › CLUTCH › 2011.10–2013.07
RM19V0EQ _V1 General _014571 SPECIFICATIONS _0073867 CLUTCH F

SPECIFICATIONS  CLUTCH  SERVICE DATA  


Pedal height from asphalt sheet 171.9 to 181.9 mm (6.768 to 7.161 in.)
Clutch pedal free play 5.0 to 15.0 mm (0.197 to 0.591 in.)
Clutch pedal push rod play at pedal top 1.0 to 5.0 mm (0.0394 to 0.197 in.)
Clutch release point from pedal full stroke end position 25 mm (0.984 in.) or more
Disc rivet head depth Minimum 0.3 mm (0.0118 in.)
Disc runout Maximum 0.8 mm (0.0314 in.)
Diaphragm spring finger wear Maximum depth: 0.5 mm (0.0196 in.)
Maximum width: 6.0 mm (0.236 in.)
Flywheel runout Maximum 0.1 mm (0.00393 in.)
Diaphragm spring tip alignment Maximum variation: 0.5 mm (0.0197 in.)

Item Capacity Classification
Brake fluid - SAE J1703 or FMVSS No. 116 DOT3