Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › DRIVE BELT
RM19V0EQ _51 Engine / Hybrid System _014574 2AR-FE ENGINE MECHANICAL _0073926 DRIVE BELT G

2AR-FE ENGINE MECHANICAL  DRIVE BELT  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT V-RIBBED BELT

a.
A058797
1.24,0.156 1.51,0.365 0.271,0.208 10 false *a
*a INCORRECT


Check the belt for wear, cracks or other signs of damage.

If any of the following defects is found, replace the V-ribbed belt.

·

The belt is cracked.

·

The belt is worn out to the extent that the cords are exposed.

·

The belt has chunks missing from the ribs.



b.
A087787
0.531,1.156 1.042,1.396 0.51,0.24 10 false *a 2.198,1.156 2.573,1.417 0.375,0.26 10 false *b
*a CORRECT
*b INCORRECT


Check that the belt fits properly in the ribbed grooves.

HINT:

Check with your hand to confirm that the belt has not slipped out of the groove on the bottom of the pulley. If it has slipped out, replace the V-ribbed belt. Install a new V-ribbed belt correctly.



Hide 16620 2.INSPECT V-RIBBED BELT TENSIONER ASSEMBLY

a.

Check that nothing gets caught in the tensioner by turning it clockwise and counterclockwise.

If a malfunction exists, replace the V-ribbed belt tensioner.