53852K
1.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH
53851Z
2.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
51442C
3.REMOVE ENGINE UNDER COVER LH
51441C
4.REMOVE ENGINE UNDER COVER RH
17410
5.REMOVE FRONT EXHAUST PIPE ASSEMBLY
Disconnect the heated oxygen sensor connector.
Remove the 2 bolts, 2 compression springs and 2 nuts.
Remove the front exhaust pipe assembly from the exhaust pipe support.
Remove the 2 gaskets from the exhaust manifold converter sub-assembly and front exhaust pipe assembly.
17118
6.REMOVE MANIFOLD STAY
Remove the bolt, nut and manifold stay.
17139
7.REMOVE NO. 2 MANIFOLD STAY
Remove the bolt, nut and No. 2 manifold stay.
17167
8.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
Remove the 4 bolts and No. 1 exhaust manifold heat insulator.
89467B
9.REMOVE AIR FUEL RATIO SENSOR
25051
10.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY
Remove the 5 nuts and exhaust manifold converter sub-assembly.
Remove the exhaust manifold to head gasket.
17168
11.REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR
Remove the 2 bolts and No. 2 exhaust manifold heat insulator.
25586
12.REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR
Remove the 4 bolts and No. 1 manifold converter insulator.