89465
1.REMOVE HEATED OXYGEN SENSOR
17430
2.REMOVE TAIL EXHAUST PIPE ASSEMBLY (for Single Type)
Remove the 2 bolts and 2 compression springs.
Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports.
Remove the gasket from the center exhaust pipe assembly.
17430
3.REMOVE TAIL EXHAUST PIPE ASSEMBLY (for Dual Type)
Remove the 2 bolts, 2 compression springs and 2 nuts.
Remove the 2 tail exhaust pipe assemblies from the 5 exhaust pipe supports.
Remove the 2 gaskets from the tail exhaust pipe assembly.
17420
4.REMOVE CENTER EXHAUST PIPE ASSEMBLY
Remove the 2 nuts.
Remove the center exhaust pipe assembly from the exhaust pipe support.
Remove the gasket from the front exhaust pipe assembly.
17410
5.REMOVE FRONT EXHAUST PIPE ASSEMBLY
Remove the 2 bolts and 2 compression springs.
Remove the front exhaust pipe assembly from the exhaust pipe support.
Remove the gasket from the exhaust manifold converter sub-assembly.