Home › Engine / Hybrid System › 2AR-FE COOLING › COOLING FAN MOTOR
RM19V0EQ _51 Engine / Hybrid System _014578 2AR-FE COOLING _0073958 COOLING FAN MOTOR G

2AR-FE COOLING  COOLING FAN MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 16363 1.CHECK COOLING FAN MOTOR

a.
A264862
1.979,3.833 2.542,3.833 false 0.938,3.833 1.51,3.833 false 2.542,0.281 2.323,0.281 2.323,0.281 2.021,0.719 false 1.646,2.854 1.854,3.073 0.208,0.219 10 false *b 0.708,3.75 0.948,3.969 0.24,0.219 10 false (+) 2.604,3.74 2.844,3.958 0.24,0.219 10 false (-) 2.594,0.188 2.802,0.406 0.208,0.219 10 false *a
*a Code Mark
*b Component without harness connected
(Cooling Fan Motor)


Check that the motor operates smoothly when the battery is connected to the fan motor connector.


b.

Measure the current while the motor is operating.

Standard current:
Item Code Mark Condition Specified Condition
Cooling fan motor S Battery voltage applied at 20°C (68°F) 7.4 to 11.4 A
M 7.7 to 11.7 A


If the result is not as specified, replace the cooling fan motor.


Hide 16363A 2.CHECK NO. 2 COOLING FAN MOTOR

a.
A264863
1.979,3.844 2.542,3.844 false 0.948,3.844 1.51,3.844 false 2.531,0.271 2.323,0.271 2.323,0.271 2.021,0.719 false 1.635,2.615 1.844,2.833 0.208,0.219 10 false *b 0.677,3.771 0.917,3.99 0.24,0.219 10 false (+) 2.625,3.74 2.865,3.958 0.24,0.219 10 false (-) 2.583,0.177 2.958,0.479 0.375,0.302 10 false *a
*a Code Mark
*b Component without harness connected
(No. 2 Cooling Fan Motor)


Check that the motor operates smoothly when the battery is connected to the fan motor connector.


b.

Measure the current while the motor is operating.

Standard current:
Item Code Mark Condition Specified Condition
No. 2 cooling fan motor S Battery voltage applied at 20°C (68°F) 7.4 to 11.4 A
M 7.7 to 11.7 A


If the result is not as specified, replace the No. 2 cooling fan motor.