Home › Engine / Hybrid System › 2AR-FE STARTING › RELAY
RM19V0EQ _51 Engine / Hybrid System _014580 2AR-FE STARTING _0073969 RELAY G

2AR-FE STARTING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 28300 1.INSPECT STARTER RELAY

a.
B060778
1.833,0.323 2.031,0.698 false 2.625,0.708 2.906,0.271 false 2.51,1.125 2.969,1.125 false 2.5,1.625 3,1.625 false 0.219,1.292 0.333,1.49 0.115,0.198 10 false 1 1.729,0.125 1.844,0.323 0.115,0.198 10 false 1 1.188,1.292 1.302,1.49 0.115,0.198 10 false 2 2.948,0.135 3.063,0.333 0.115,0.198 10 false 2 1.188,0.76 1.302,0.958 0.115,0.198 10 false 3 3.042,1.531 3.156,1.729 0.115,0.198 10 false 3 0.219,0.76 0.333,0.958 0.115,0.198 10 false 5 3.031,1 3.146,1.198 0.115,0.198 10 false 5

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Battery voltage applied between terminals 1 and 2 Below 1 Ω


If the resistance is not as specified, replace the relay.