84540
1.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
| *a | Component without harness connected
(Park/Neutral Position Switch Assembly) |
Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.
| Tester Connection | Shift Lever Position | Specified Condition |
|---|---|---|
| 4 (B) - 9 (L) | P or N | Below 1 Ω |
| Except P and N | 10 kΩ or higher | |
| 1 (RB) - 3 (PL) | P | Below 1 Ω |
| Except P | 10 kΩ or higher | |
| 1 (RB) - 8 (NL) | N | Below 1 Ω |
| Except N | 10 kΩ or higher | |
| 1 (RB) - 2 (RL) | R | Below 1 Ω |
| Except R | 10 kΩ or higher | |
| 1 (RB) - 7 (DL) | D, S, "+" or "-" | Below 1 Ω |
| Except D, S, "+" and "-" | 10 kΩ or higher |
If the result is not as specified, replace the park/neutral position switch assembly.