Home › Drivetrain › U760E AUTOMATIC TRANSMISSION / TRANSAXLE › DIFFERENTIAL CASE › 2011.10–2014.05
RM19V0EQ _52 Drivetrain _014582 U760E AUTOMATIC TRANSMISSION / TRANSAXLE _0073985 DIFFERENTIAL CASE G

U760E AUTOMATIC TRANSMISSION / TRANSAXLE  DIFFERENTIAL CASE  INSPECTION  


PROCEDURE

Hide 1.INSPECT DIFFERENTIAL SIDE GEAR BACKLASH

a.
C083562

Hold the differential case in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.

Place a dial indicator on the tip of the side gear tooth at a right angle.


c.

Hold the pinion gear in the differential case and measure the backlash of the side gear.

Standard backlash:

0.05 to 0.2 mm (0.00197 to 0.00787 in.)


Thrust Washer Thickness
Thickness [mm (in.)]
1.00 (0.0394)
1.10 (0.0433)
1.20 (0.0472)
1.30 (0.0512)

If the backlash is greater than the standard range, select another side gear thrust washer.