Home › Drivetrain › U760E AUTOMATIC TRANSMISSION / TRANSAXLE › DIFFERENTIAL CASE › 2011.10–2014.05
RM19V0EQ _52 Drivetrain _014582 U760E AUTOMATIC TRANSMISSION / TRANSAXLE _0073985 DIFFERENTIAL CASE A

U760E AUTOMATIC TRANSMISSION / TRANSAXLE  DIFFERENTIAL CASE  DISASSEMBLY  


PROCEDURE

Hide 41221 1.REMOVE FRONT DIFFERENTIAL RING GEAR

a.
C138531
1.26,1.438 0.552,0.969 0.552,0.969 1.177,1.5 false 0.354,0.854 0.635,1.063 0.281,0.208 10 false *a
*a Matchmark


Put matchmarks on the front differential ring gear and front differential case.


b.
C138532

Remove the 12 bolts.


c.
C138533

Using a plastic hammer, tap on the front differential ring gear to remove it from the front differential case.


Hide 41311E 2.REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

a.
C287379
1.938,1.323 2.49,0.958 2.49,0.958 1.885,1.26 false 2.313,1.375 2.5,0.948 2.5,0.948 2.26,0.948 false 2.719,0.188 3.063,0.448 0.344,0.26 10 false *a 0.396,0.615 0.708,0.885 0.313,0.271 10 false *b 2.573,0.813 3.167,1.135 0.594,0.323 10 false SST
*a Turn
*b Hold


Using SST, remove the front differential case front tapered roller bearing from the front differential case.

SST
09950-00020  
09950-00030  
09950-40011  (09957-04010)
09950-60010  (09951-00480)


b.
C201324
2.834,0.246 3.125,0.408 0.291,0.163 10 SST 2.816,0.329 2.701,0.329 2.701,0.329 2.357,0.568 false

Using SST, remove the front differential case front tapered roller bearing (outer race) and shim from the transaxle housing.

SST
09308-00010  


Hide 41311F 3.REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

a.
C287380
1.917,1.469 2.625,0.99 2.625,0.99 1.844,1.406 false 2.281,1.521 2.635,0.99 2.635,0.99 2.229,0.99 false 2.698,0.354 3.031,0.615 0.333,0.26 10 false *a 0.375,0.76 0.708,1.052 0.333,0.292 10 false *b 2.698,0.885 3.177,1.156 0.479,0.271 10 false SST
*a Turn
*b Hold


Using SST, remove the front differential case rear tapered roller bearing from the front differential case.

SST
09950-00020  
09950-00030  
09950-40011  (09957-04010)
09950-60010  (09951-00480)


b.
C138536
1.49,0.635 1.979,0.635 false 2.042,0.563 2.604,0.802 0.563,0.24 10 false SST

Using SST, remove the front differential case rear tapered roller bearing (outer race) from the transaxle case sub-assembly.

SST
09308-00010  


Hide 41342A 4.REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

a.
C193758
1.583,0.771 1.073,0.219 1.073,0.219 0.896,0.219 false 0.552,0.125 1,0.438 0.448,0.313 10 SST

Using SST and a hammer, loosen the staked part of the differential case.

SST
09930-00010  


b.
C138710

Using a 5 mm pin punch and hammer, remove the front differential pinion shaft straight pin from the differential case.

NOTICE:

Before removing the front differential pinion shaft straight pin, unstake it with a pin punch.



Hide 41342F 5.REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT

a.
C138706

Remove the front No. 1 differential pinion shaft from the differential case.


Hide 6.REMOVE DIFFERENTIAL SIDE GEAR

a.
C138528

Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 front differential side gears, and 2 No. 1 front differential side gear thrust washers from the differential case.


Hide 31105D 7.REMOVE FRONT TRANSAXLE CASE OIL SEAL

a.
C201325
1.802,0.656 2.833,0.417 2.833,0.417 1.875,1.188 false 2.885,0.323 3.313,0.563 0.427,0.24 10 false SST

Using SST and a hammer, remove the front transaxle case oil seal from the transaxle housing.

SST
09950-60010  (09951-00550)
09950-70010  (09951-07200)


Hide 31105H 8.REMOVE TRANSAXLE CASE OIL SEAL

a.
C138709
1.333,1.302 0.5,1.771 0.5,1.771 1.229,1.563 false 0.177,1.708 0.5,1.896 0.323,0.188 10 false SST

Using SST and a hammer, remove the transaxle case oil seal from the transaxle case sub-assembly.

SST
09950-60010  (09951-00650)
09950-70010  (09951-07100)