Home › Drivetrain › U760E AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION CONTROL CABLE
RM19V0EQ _52 Drivetrain _014582 U760E AUTOMATIC TRANSMISSION / TRANSAXLE _0073988 TRANSMISSION CONTROL CABLE N

U760E AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT SHIFT LEVER POSITION

a.

When the shift lever is moved from P to R with the ignition switch ON and brake pedal depressed, make sure that the shift lever moves smoothly and correctly into the position.


b.

Start the engine and make sure that the vehicle moves forward when the shift lever is moved from N to D and moves rearward when the shift lever is moved to R.


Hide 2.ADJUST SHIFT LEVER POSITION

a.

Move the shift lever to N.


b.

Remove the console box assembly.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX>REMOVAL


c.
C239451

Disconnect the end of the transmission control cable assembly from the lower shift lever assembly.


d.
C194520C18
2.26,2.573 2.583,2.573 false 1.948,1.75 2.094,1.5 2.094,1.5 2.198,1.5 false 1.615,0.958 1.802,1.135 0.188,0.177 10 *a 1.792,1.344 1.979,1.521 0.188,0.177 10 *a 2.438,0.781 2.625,0.958 0.188,0.177 10 *b 2.229,1.427 2.417,1.604 0.188,0.177 10 *1 2.229,2.313 2.417,2.49 0.188,0.177 10 *b 2.625,2.49 2.813,2.667 0.188,0.177 10 *2
*1 Slider
*2 Lock Piece
*a Slide
*b Pull


Slide the slider of the transmission control cable in the direction indicated by the arrow and pull the lock piece outward.


e.
C239661C12
1.207,2.686 1.058,2.516 1.058,2.516 0.968,2.516 false 0.772,2.442 0.93,2.6 0.158,0.158 10 *1
*1 Lock Piece


Install the end of the transmission control cable to the lower shift lever assembly.

NOTICE:
·

Check that the lock piece is pulled up.

·

Install the cable end all the way to the base of the pin.




f.

Push the lock piece into the adjuster case.

NOTICE:
·

Check that the park/neutral position switch and the shift lever are in neutral.

·

Securely push in the lock piece until the slider lock is engaged.




g.

After adjusting the shift lever position, check the operation and function of the shift lever. If there is a problem, adjust the position again.


h.