Home › Drivetrain › EB62 MANUAL TRANSMISSION / TRANSAXLE › MANUAL TRANSAXLE OIL › 2011.10–2013.07
RM19V0EQ _52 Drivetrain _014584 EB62 MANUAL TRANSMISSION / TRANSAXLE _0073996 MANUAL TRANSAXLE OIL A

EB62 MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE OIL  REPLACEMENT  


PROCEDURE

Hide 1.DRAIN MANUAL TRANSAXLE OIL

a.
C248278
2.146,1.719 2.146,2.031 2.146,2.031 2.813,2.031 false 2.156,0.365 2.302,0.365 2.302,0.365 2.448,0.49 false 1.927,0.302 2.156,0.521 0.229,0.219 10 false *1 2.885,1.938 3.198,2.125 0.313,0.188 10 true *2
*1 Manual Transmission Filler Plug
*2 Manual Transmission Drain Plug


Remove the manual transmission filler plug and gasket.


b.

Remove the manual transmission drain plug and gasket to drain the manual transaxle oil.


c.

Install the manual transmission drain plug with a new gasket.

Torque:
39 N*m (400 kgf*cm, 29 ft.*lbf)


Hide 2.ADD MANUAL TRANSAXLE OIL

a.
D025304

Add oil until the oil level is within 5 mm (0.197 in.) from the bottom of the manual transmission filler plug opening.


b.

Install the manual transmission filler plug with a new gasket.

Torque:
39 N*m (400 kgf*cm, 29 ft.*lbf)

NOTICE:
·

When adding manual transaxle oil, make sure that the vehicle is level.

·

An excessively large or small amount of oil may cause problems.

·

After adding oil, drive the vehicle and recheck the oil level.




Hide 3.INSPECT FOR OIL LEAK