Home › Drivetrain › EB62 MANUAL TRANSMISSION / TRANSAXLE › SHIFT AND SELECT LEVER SHAFT › 2011.10–2013.07
RM19V0EQ _52 Drivetrain _014584 EB62 MANUAL TRANSMISSION / TRANSAXLE _0074005 SHIFT AND SELECT LEVER SHAFT A

EB62 MANUAL TRANSMISSION / TRANSAXLE  SHIFT AND SELECT LEVER SHAFT  DISASSEMBLY  


PROCEDURE

Hide 33252A 1.REMOVE INNER NO. 2 SHIFT LEVER

a.

Secure the shift and select lever shaft assembly in a vise between aluminum plates.


b.
C204826

Using a (5 mm) pin punch and hammer, tap out the slotted spring pin and remove the inner No. 2 shift lever from the shift and select lever shaft.

HINT:

Make a note of the orientation of the inner No. 2 shift lever so that it can be reinstalled in the same position.



Hide 33926 2.REMOVE FRONT INNER SHIFT LEVER

a.
C200227

Using a (5 mm) pin punch and hammer, tap out the slotted spring pin from the shift and select lever shaft and remove the front inner shift lever.

HINT:

Make a note of the orientation of the front inner shift lever so that it can be reinstalled in the same position.



Hide 33237 3.REMOVE RELEASE HEAD

a.
C204827

Using a (5 mm) pin punch and hammer, tap out the slotted spring pin from the shift and select lever shaft and remove the release head.

HINT:

Make a note of the orientation of the release head so that it can be reinstalled in the same position.