Home › Drivetrain › EB62 MANUAL TRANSMISSION / TRANSAXLE › SHIFT AND SELECT LEVER SHAFT › 2011.10–2013.07
RM19V0EQ _52 Drivetrain _014584 EB62 MANUAL TRANSMISSION / TRANSAXLE _0074005 SHIFT AND SELECT LEVER SHAFT A

EB62 MANUAL TRANSMISSION / TRANSAXLE  SHIFT AND SELECT LEVER SHAFT  REASSEMBLY  


PROCEDURE

Hide 33237 1.INSTALL RELEASE HEAD

a.

Install the release head to the shift and select lever shaft.


b.
C204828
2.833,1.094 3.177,1.448 0.344,0.354 10 false *a
*a Depth


Using a (5 mm) pin punch and hammer, tap in the slotted spring pin to the shift and select lever shaft.

Standard depth:

-0.2 to 0.8 mm (-0.00787 to 0.0315 in.)


NOTICE:

Make sure that the installation direction is correct.



Hide 33926 2.INSTALL FRONT INNER SHIFT LEVER

a.

Install the front inner shift lever to the shift and select lever shaft.


b.
C200230
1.99,0.708 2.26,0.99 0.271,0.281 10 false *a
*a Depth


Using a (5 mm) pin punch and hammer, tap in the front inner shift lever and slotted spring pin to the shift and select lever shaft.

Standard depth:

-0.2 to 0.8 mm (-0.00787 to 0.0315 in.)


NOTICE:

Make sure that the installation direction is correct.



Hide 33252A 3.INSTALL INNER NO. 2 SHIFT LEVER

a.

Install the inner No. 2 shift lever to the shift and select lever shaft.


b.
C204829
1.948,0.615 2.26,0.854 0.313,0.24 10 false *a
*a Depth


Using a (5 mm) pin punch and hammer, tap in the inner No. 2 shift lever and slotted spring pin to the shift and select lever shaft.

Standard depth:

0 to 0.6 mm (0 to 0.023 in.)


NOTICE:

Make sure that the installation direction is correct.