Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER › 2011.10–2015.04
RM19V0EQ _53 Suspension _014588 FRONT SUSPENSION _0074019 FRONT SHOCK ABSORBER N

FRONT SUSPENSION  FRONT SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 48520 1.DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY

a.
C247237
1.737,0.245 1.859,0.392 0.122,0.146 10 A 2.459,0.245 2.581,0.392 0.122,0.146 10 B

Position the front shock absorber assembly level with the piston rod fully extended. Using a drill, make a hole in the cylinder between A and B as shown in the illustration to discharge the gas inside.

CAUTION:

Always use proper safety equipment and be careful when drilling because shards of metal may fly about.


HINT:

The gas is colorless, odorless and non-poisonous.