47131
1.INSTALL STOP LIGHT SWITCH CUSHION
47101B
2.INSTALL BRAKE PEDAL BUSHING
|
Lithium Soap Base Glycol Grease |
Apply a light layer of lithium soap base glycol grease to 4 new brake pedal bushings.
Install the 4 brake pedal bushings to the brake pedal sub-assembly.
47124A
3.INSTALL BRAKE PEDAL SHAFT COLLAR
Install the 2 brake pedal shaft collars to the brake pedal sub-assembly.
Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the 2 bolts and 2 nuts.
47121
4.INSTALL BRAKE PEDAL PAD
Install the brake pedal pad to the brake pedal support assembly.