1.REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT
Use the same procedure for LHD and RHD.
Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>REMOVAL
89940
2.REMOVE AFS ECU (w/ Automatic High Beam System)
84340
3.REMOVE STOP LIGHT SWITCH ASSEMBLY
84345
4.REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER
47264A
5.REMOVE PUSH ROD PIN
Remove the clip and push rod pin.
Separate the brake master cylinder push rod clevis from the brake pedal support assembly.
47101A
6.REMOVE BRAKE PEDAL RETURN SPRING
Remove the brake pedal return spring from the brake pedal support assembly.
47110
7.REMOVE BRAKE PEDAL SUPPORT ASSEMBLY
Disconnect the connector.
Disengage the 3 clamps and separate the wire harness from the brake pedal support assembly.
Remove the 4 nuts and brake pedal support assembly.