47230
1.REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
47299
2.REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER
47210U
3.REMOVE BRAKE MASTER CYLINDER STRAIGHT PIN
Mount the brake master cylinder sub-assembly in a vise.
Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.
Using a pin punch and a hammer, tap out the brake master cylinder straight pin from the brake master cylinder sub-assembly.
Do not drop the brake master cylinder reservoir sub-assembly.
47202
4.REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
Remove the brake master cylinder reservoir sub-assembly from the brake master cylinder assembly.
47255
5.REMOVE MASTER CYLINDER RESERVOIR GROMMET
Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir sub-assembly.