Home › Brake › BRAKE (FRONT) › FRONT BRAKE › 2011.10–2015.04
RM19V0EQ _54 Brake _014593 BRAKE (FRONT) _0074048 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH side and RH side.

·

The following procedure is for the LH side.

·

Refer to the illustration to confirm the type of brake used.

C249685
1.875,2.052 2.333,2.198 false 0.75,0.74 0.927,0.792 false 4.24,0.74 4.406,0.792 false 5.458,2.052 5.917,2.198 false 0.094,0.104 0.271,0.25 0.177,0.146 10 false *A 3.896,0.115 4.073,0.26 0.177,0.146 10 false *B 1.698,1.979 1.875,2.125 0.177,0.146 10 false *1 4.073,0.667 4.25,0.813 0.177,0.146 10 false *2 5.292,1.979 5.469,2.125 0.177,0.146 10 false *1 0.573,0.667 0.75,0.813 0.177,0.146 10 false *2
*A for PBR Made *B for ADVICS Made
*1 Front Disc *2 Front Disc Brake Cylinder




PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.


Hide 47313A 3.SEPARATE FRONT FLEXIBLE HOSE

a.

for PBR Made:

i.
C246328

Remove the union bolt and 2 gaskets, and separate the front flexible hose from the disc brake cylinder assembly.



b.

for ADVICS Made:

i.
C238481

Remove the union bolt and gasket, and separate the front flexible hose from the disc brake cylinder assembly.



Hide 47750 4.REMOVE DISC BRAKE CYLINDER ASSEMBLY

a.

for PBR Made:

i.
C248003C01
1.29,1.0 1.465,1.161 0.175,0.161 10 *a 0.333,1.454 0.488,1.597 0.155,0.144 10 *b
*a Hold
*b Turn


Hold the front disc brake cylinder slide pin, and remove the 2 bolts and disc brake cylinder assembly.



b.

for ADVICS Made:

i.
C239567
1.035,1.424 1.215,1.576 0.18,0.152 10 *a 0.899,0.4 1.072,0.567 0.173,0.167 10 *b
*a Hold
*b Turn


Hold the front disc brake cylinder slide pin, and remove the 2 bolts and disc brake cylinder assembly.



Hide 5.REMOVE FRONT DISC BRAKE PAD

a.

for PBR Made:

i.
C246330

Remove the 2 front disc brake pads from the front disc brake cylinder mounting.



Hide 04465 6.REMOVE FRONT DISC BRAKE PAD KIT

a.

for ADVICS Made:

i.
C238483

Remove the 2 anti-squeal springs from the front disc brake pads.


ii.
C238484

Remove the 2 front disc brake pads with front anti-squeal shim kit from the front disc brake cylinder mounting.



Hide 04945 7.REMOVE FRONT ANTI-SQUEAL SHIM KIT

a.

for ADVICS Made:

i.
C239559

Remove the front disc brake anti-squeal shim from each front disc brake pad.


ii.
C239560

Remove the front disc brake pad wear indicator plate from each front disc brake pad.



Hide 47716 8.REMOVE FRONT DISC BRAKE PAD SUPPORT PLATE

a.

for PBR Made:

i.
C246331

Remove the 2 front disc brake pad support plates from the front disc brake cylinder mounting.



Hide 04947 9.REMOVE FRONT DISC BRAKE FITTING KIT

a.

for ADVICS Made:

i.
C238485
1.854,1.76 2.448,1.76 true 2.052,0.635 3.052,0.635 true 1.333,0.625 0.396,0.625 true 1.25,1.646 0.75,1.646 true 3.094,0.552 3.25,0.698 0.156,0.146 10 false *1 2.469,1.688 2.635,1.844 0.167,0.156 10 false *2 0.573,1.573 0.729,1.719 0.156,0.146 10 false *1 0.229,0.542 0.396,0.698 0.167,0.156 10 false *2
*1 Front No. 1 Disc Brake Pad Support Plate
*2 Front No. 2 Disc Brake Pad Support Plate


Remove the 2 front No. 1 disc brake pad support plates and 2 front No. 2 disc brake pad support plates from the front disc brake cylinder mounting.

NOTICE:

Each front disc brake pad support plate has a different shape. Be sure to put an identification mark on each front disc brake pad support plate so that it can be reinstalled to its original position.




Hide 47715A 10.REMOVE FRONT DISC BRAKE CYLINDER SLIDE PIN

a.

for PBR Made:

i.
C246332

Remove the 2 front disc brake cylinder slide pins with the front disc brake bushing dust boot from each front disc brake cylinder mounting.



b.

for ADVICS Made:

i.
C238486

Remove the front disc brake cylinder slide pin from the front disc brake cylinder mounting.



Hide 47715D 11.REMOVE FRONT NO. 2 DISC BRAKE CYLINDER SLIDE PIN

a.

for ADVICS Made:

i.
C238487

Remove the front No. 2 disc brake cylinder slide pin from the front disc brake cylinder mounting.



Hide 47769 12.REMOVE FRONT DISC BRAKE CYLINDER SLIDE BUSHING

a.

for ADVICS Made:

i.
C210924
2.333,1.396 2.333,1 2.333,1 2.542,1 false 2.594,0.917 2.906,1.135 0.313,0.219 10 *1
*1 Vinyl Tape


Using a screwdriver with its tip wrapped with vinyl tape, remove the front disc brake cylinder slide bushing from the front No. 2 disc brake cylinder slide pin.

NOTICE:

Do not damage the front No. 2 disc brake cylinder slide pin.




Hide 47775 13.REMOVE FRONT DISC BRAKE BUSHING DUST BOOT

a.

for PBR Made:

i.

Remove the front disc brake bushing dust boot from the front disc brake cylinder slide pin.



Hide 47722 14.REMOVE FRONT DISC BRAKE CYLINDER MOUNTING

a.

for PBR Made:

i.
C246333

Remove the 2 bolts and front disc brake cylinder mounting from the steering knuckle.



b.

for ADVICS Made:

i.
C238488

Remove the 2 bolts and front disc brake cylinder mounting from the steering knuckle.



Hide 47775 15.REMOVE FRONT DISC BRAKE BUSHING DUST BOOT

a.

for ADVICS Made:

i.
C238489

Secure the front disc brake cylinder mounting in a vise.


ii.

Using a screwdriver and a plastic hammer, remove the 2 front disc brake bushing dust boots.



Hide 43512 16.REMOVE FRONT DISC

a.
C238490C03
2.302,1.271 3.052,1.198 3.052,1.198 2.281,1.198 true 3.073,1.125 3.365,1.469 0.292,0.344 10 *a
*a Matchmark


Put matchmarks on the front disc and the front axle hub.


b.

Remove the front disc.