Home › Brake › BRAKE (REAR) › REAR BRAKE FLEXIBLE HOSE › 2011.10–2015.04
RM19V0EQ _54 Brake _014594 BRAKE (REAR) _0074051 REAR BRAKE FLEXIBLE HOSE A

BRAKE (REAR)  REAR BRAKE FLEXIBLE HOSE  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

If the left and right hoses are disconnected at the same time, be sure to place a mark on each hose to indicate its installation position.


HINT:
·

Use the same procedure for the LH side and RH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.


Hide 47319F 3.REMOVE REAR FLEXIBLE HOSE

a.
C238509C02
0.958,0.583 1.083,0.458 1.083,0.458 1.219,0.458 false 0.823,0.771 0.75,0.844 0.75,0.844 0.677,0.844 false 2.156,0.823 1.865,0.823 1.865,0.823 1.865,1.104 true 1.24,0.375 1.49,0.615 0.25,0.24 10 *1 0.479,0.76 0.74,1.052 0.26,0.292 10 *2 1.813,1.125 2.063,1.375 0.25,0.25 10 *3
*1 Brake Line
*2 Clip
*3 Bolt


Using a union nut wrench, disconnect the brake line while holding the rear flexible hose with a wrench.

NOTICE:
·

Do not bend or damage the brake line.

·

Do not allow any foreign matter such as dirt or dust to enter the brake line from the connecting points.




b.

Remove the clip from the rear flexible hose.


c.

Remove the bolt.


d.

for PBR Made:

i.
C246335

Remove the union bolt, 2 gaskets and rear flexible hose.



e.

for ADVICS Made:

i.
C243121

Remove the union bolt, gasket and rear flexible hose.