Home › Brake › PARKING BRAKE › PARKING BRAKE SWITCH(for Manual Transaxle) › 2011.10–2013.07
RM19V0EQ _54 Brake _014595 PARKING BRAKE _0074060 PARKING BRAKE SWITCH(for Manual Transaxle) G

PARKING BRAKE  PARKING BRAKE SWITCH(for Manual Transaxle)  INSPECTION  


PROCEDURE

Hide 84550 1.INSPECT PARKING BRAKE SWITCH ASSEMBLY

a.
C246250
2.49,1.823 2.49,1.198 false 0.583,1.813 0.583,1.323 0.583,1.323 0.792,1.323 false 2.438,1.854 2.75,2.01 0.313,0.156 10 *1 0.531,1.833 0.844,1.99 0.313,0.156 10 *2 0.99,0.427 1.302,0.583 0.313,0.156 10 *a 0.99,0.688 1.302,0.844 0.313,0.156 10 *b
*1 Terminal
*2 Nut
*a ON
*b OFF


Measure the resistance between the connector terminal and the nut inside the parking brake switch assembly.

Standard Resistance
Tester Connection Switch Condition Specified Condition
Terminal - Nut On (When shaft is not pressed) Below 1 Ω
Terminal - Nut Off (When shaft is pressed) 10 kΩ or higher

If the value is not as specified, replace the parking brake switch assembly.