Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM
RM19V0EQ _55 Steering _014596 POWER ASSIST SYSTEMS _0074061 POWER STEERING SYSTEM C

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  U0100/41  Lost Communication with ECM/PCM "A"  U0129/42  Lost Communication with Brake System Control Module  


DESCRIPTION

The power steering ECU assembly receives signals from the ECM and brake actuator assembly via the CAN communication system.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Return-to-normal Condition
U0100/41 Lost Communication with ECM/PCM "A" Lost communication with ECM
·

CAN communication system

·

ECM


EPS Warning Light: When an error occurs during steering assist, the warning light does not illuminate. For errors that occur before assist (at the time of the decision to start assist), the warning light illuminates. After normal confirmation
U0129/42 Lost Communication with Brake System Control Module Lost communication with brake actuator assembly
·

CAN communication system

·

Brake actuator assembly


EPS Warning Light: Comes on After normal confirmation

PROCEDURE

1.GO TO CAN COMMUNICATION SYSTEM

Result:
Proceed to
NEXT



NEXT

END