Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING ECU
RM19V0EQ _55 Steering _014596 POWER ASSIST SYSTEMS _0074062 POWER STEERING ECU A

POWER ASSIST SYSTEMS  POWER STEERING ECU  INSTALLATION  


PROCEDURE

Hide 89650 1.INSTALL POWER STEERING ECU ASSEMBLY

a.

Install the power steering ECU assembly to the power steering motor assembly with 2 new bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


b.

Install 3 new bolts.

Torque:
3.2 N*m (33 kgf*cm, 28 in.*lbf)


c.

Engage the 4 claws to install a new protector.


Hide 2.INSTALL POWER STEERING ECU WITH MOTOR ASSEMBLY

Hide F1901 3.CONNECT ECU WIRE SUB-ASSEMBLY

a.

Connect the 2 connectors to the power steering ECU assembly.


Hide 8965A 4.INSTALL POWER STEERING ECU PROTECTOR

Hide 5.INSTALL STEERING COLUMN UPPER WITH SWITCH BRACKET ASSEMBLY (w/o Smart Entry and Start System)

Hide 45020A 6.INSTALL STEERING LOCK ACTUATOR ASSEMBLY (w/ Smart Entry and Start System)

Hide 7.INSTALL STEERING COLUMN ASSEMBLY