Home › Steering › STEERING COLUMN › STEERING PAD SWITCH › 2011.10–2015.04
RM19V0EQ _55 Steering _014597 STEERING COLUMN _0074066 STEERING PAD SWITCH A

STEERING COLUMN  STEERING PAD SWITCH  INSTALLATION  


PROCEDURE

Hide 84250A 1.INSTALL STEERING PAD SWITCH ASSEMBLY

a.

Engage the 2 claws, 2 pins and 2 guides to install the steering pad switch assembly.


b.

Install the 2 screws.

Torque:
2.4 N*m (24 kgf*cm, 21 in.*lbf)


c.

w/ Back Switch of Steering Pad Switch Assembly

i.

Engage the clamp.


ii.

Connect the No. 1 switch wire connector.



d.

Connect the steering pad switch connector to the spiral cable sub-assembly.


e.
C239683

Pass the wire harness over the 2 guides.


Hide 45130 2.INSTALL HORN BUTTON ASSEMBLY