Home › Audio / Visual / Telematics › AUDIO / VIDEO › INSTRUMENT PANEL SPEAKER › 2011.10–2014.05
RM19V0EQ _56 Audio / Visual / Telematics _014599 AUDIO / VIDEO _0074071 INSTRUMENT PANEL SPEAKER A

AUDIO / VIDEO  INSTRUMENT PANEL SPEAKER  INSTALLATION  


PROCEDURE

Hide 86160P 1.INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

a.

Connect the connector.


b.
E226776C05
0.583,1.438 0.781,1.604 0.198,0.167 10 true (1) 2.656,1.083 2.854,1.25 0.198,0.167 10 true (2) 0.594,3.375 0.792,3.542 0.198,0.167 10 true (1) 2.708,3.615 2.906,3.781 0.198,0.167 10 true (2) 0.083,0.26 0.333,0.5 0.25,0.24 12 true *A 0.083,2.594 0.417,2.833 0.333,0.24 12 true *B
*A LH Side
*B RH Side


Install the front No. 2 speaker assembly with the 2 screws.

NOTICE:

Do not touch the speaker cone.


HINT:

Install the screws in the order shown in the illustration.



Hide 55408F 2.INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

Hide 62212 3.INSTALL FRONT PILLAR GARNISH (w/o Curtain Shield Airbag)

Hide 62212 4.INSTALL FRONT PILLAR GARNISH (w/ Curtain Shield Airbag)

Hide 62312B 5.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

Hide 86160J 6.INSTALL FRONT NO. 3 SPEAKER ASSEMBLY (for 10 Speakers)

a.

Connect the connector.


b.
E223721N01
2.333,0.448 2.698,0.75 0.365,0.302 10 (1) 0.74,0.354 1.042,0.583 0.302,0.229 10 (2)

Install the front No. 3 speaker assembly with the 2 screws.

NOTICE:

Do not touch the speaker cone.


HINT:

Install the screws in the order shown in the illustration.



Hide 55510F 7.INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY (for 10 Speakers)

Hide 8.INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for 10 Speakers)

Hide 55660 9.INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY (for 10 Speakers)

Hide 10.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for 10 Speakers)

Hide 58804A 11.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for 10 Speakers)

Hide 58916 12.INSTALL BOX BOTTOM MAT (for 10 Speakers)

Hide 13.INSTALL REAR CONSOLE BOX ASSEMBLY (for 10 Speakers)

Hide 14.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for 10 Speakers)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION