Home › Audio / Visual / Telematics › AUDIO / VIDEO › REAR PACKAGE TRAY SPEAKER
RM19V0EQ _56 Audio / Visual / Telematics _014599 AUDIO / VIDEO _0074072 REAR PACKAGE TRAY SPEAKER G

AUDIO / VIDEO  REAR PACKAGE TRAY SPEAKER  INSPECTION  


PROCEDURE

Hide 86160B 1.INSPECT REAR SPEAKER ASSEMBLY

a.

With the speaker installed, check that there is no looseness or other abnormalities.


b.

Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.


c.
E219303
0.095,0.059 0.271,0.224 0.176,0.165 10 *a
*a Component without harness connected
(Rear Speaker Assembly)


Measure the resistance of the speaker.

Standard Resistance:
for 6 Speakers:
Tester Connection Condition Specified Condition
1 - 2 Always 3.2 to 4.8 Ω

for 10 Speakers:
Tester Connection Condition Specified Condition
1 - 2 Always 4.8 to 6.8 Ω


If the result is not as specified, replace the speaker.


Hide 86160Y 2.INSPECT REAR NO. 2 SPEAKER ASSEMBLY (for 10 Speakers)

a.

With the speaker installed, check that there is no looseness or other abnormalities.


b.

Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.


c.
E222247
0.095,0.047 0.279,0.222 0.185,0.175 10 *a
*a Component without harness connected
(Rear No. 2 Speaker Assembly)


Measure the resistance of the speaker.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 6.8 to 10.2 Ω


If the result is not as specified, replace the speaker.